Viewing all customer Discussions for:

Door & Window

picture of intact, working pivot shoe from another identical double hung window. Broken shoes are in pieces.

Hello, im looking for the a replacement part to a skylight. The mechanism to lift and lower the glass was originally missing the part that you twist or spin to operate it. Ill send pics. Please let me know if i can just replace the smaller part or if the whole thing is necessary. Thank you for your ... (cont.)

My balance does not have a stamp that matches. Which one should i choose for my balance order? Thank you!

Need replacement mechanism for other window. Distance between outer screws on mechanism box is approximately 3 inches

I have attached 3 views of the window latch for old aluminum sliding glass windows. I need 2 of them. Do you you carry this product? Regards, Sally

I have a broken slider latch from a roughly 15-year-old Viking window (purchased from Lowes). The closest match I could find on your site is 90-278. It mounted correctly, but doesn't latch properly. The old striker lays flat against the window with screws perpendicular to the latch. The old disc i ... (cont.)

I manage a large condominium building with thousands of screens. These screens each have two plastic door parts on the screens which must be opened in order to reach the handle of the window sash. Many of these plastic door parts need replacement, and I need to figure out where they could be ordered ... (cont.)

I could not find a replacement in your listing that was as long as the ones on our window, which as you can see are 3 and 1/8 in. long. The replacement tilt release latches would be for Great Lakes Buckingham windows installed in the mid-nineties. Thanks for your help in identifying the part. ... (cont.)

We were told you might have replacement parts for our generic sliding doors? The wheels and the springs, as well as the door hankdles are missing this spring Our door handles are 4 inches long Our width of slider is 5/8 inch

I would like help identifying the correct part number for my window channels per attached pics. 33" metal channel, 9/16 (1/2") for a non-tilting window manufactured by Hurd. Needs shoe and top per attached pics. Regards, Jim

have attached photos and dimensions of lock required for an exterior sliding glass door. Although I need only the mortice lock I would buy the strike plate and handle, etc if necessary. Please advise if the attached is something that you sell and its cost. The problem with the lock is that the locki ... (cont.)

Hi, We have approximately 500 double hung windows and we are running out of parts. If you can help me locate this items I would like to order 200 sash clips and 100 of each size balance we have. If there is anymore information or pictures you would need let me know. Thank you for your considera ... (cont.)

I need a spring balance replacement for a single hung window. Length of the balance is 21", the width is 1/2", and there is 20 5 DP Caldwell stamp on the metal channel.

I need a new locking patch. The sticker I found says sil1 as manufacturer. Series is s500 5700 patio door

I viewed the installation diagram on your webpage (guides/view8) for the in-swinging door bracket. I am installing a standard outward swinging storm door with the hinges on the right side, but am installing it so that it will swing inwards (opens on the left side) to an enclosed porch. If the bracke ... (cont.)

im looking for a replacement door sweep -- could you please recommend a part -- the door is 36 inches

Is this product only available in black?

I don't know what brand of door it is, It's all wood looking for the outside plastic molding Thank you, Eugene Y

Our bottom sash weighs 30lbs and has a triple coil balance that needs replaced. We feel almost certain we need the Series 160 coils. There is no stamp identifier on the old coils that we could find. Do we need three of the 4.5lbs coils (13.5lbs) or three of the 5.5lbs (16.5lbs) coils for the 30l ... (cont.)

I looking for a Truth operator from a Crestline window. Operator is a Left hand 8" center to center piviot to roller 91/2" overall arm length. #on base 45275