Viewing all customer Discussions for:

Door & Window

I need replacement parts for a Nuprime window. I've attached a photo of the one that is not broken and installed. I've also attached the broken parts that need to be replaced - but I believe another piece is needed as well. Thank you

Thank you so much for your time. I have included pictures of my part. I need the left and right side if that matters. It reads 28 3 BSI tk.

Handle for the lock snapped

I am looking for several replacement parts for my nupprime windows

I have a single hung 37" channel balance made by PGT with a printer part number of (36 4 BW CMC 2). With that part number, can you tell be what stamp option to select in-order to place an order for channel balances? Thanks! Kurt

the Wheel are 1 3/8" (3.5 cm) I would like to know if u can supply and also price for two units

I am looking for 2 parts one is a latch and the other is the cranking part for the window to crank out

The two holes at the top of the operator the holes are 1/2 inch apart and the two holes at the bottom of the operator the measurements are 1 inch and a sixteenth.

These are the only parts I have the window is 28 inches wide. It is an Andersen window I guess I would need all parts to operate window maybe we can retrofit

My windows are Capital 9555 series vinyl double hung windows with a measure in 31"x31" as shown in the attached files. The coil width is 0.5". Need your help to determine the type of the coil. Thanks!

4248 1 DL CALDWELL

Do you have rivets available to install the operator tracks? Existing rivets appear to be about 1/4 inch hole, 3/16 head, 1/8 grip.

the 39-378 is a right hand operator that matches the old operators I want to replace, hole centers shape ... I can not find matching left hand Can you help? I need two. The two holes on the bottom and the single hole on top are exact match to my piece.The center of the existing holes are 5&1/4 ... (cont.)

I have found one label on this door that has a manufacture date of 02/97 my numbers are SGD-R20-96X96(DG) manufacture code PHP

Hi, Can you direct me to the Swisco replacement parts for the handle and thumb lock? Thank you,, Jeff

I have attached some information regarding the window screens that were installed on our home in Bedford NH (2002). They were originally purchased from Jackson Lumber Company in MA. Thank You, Al

Hi, I'm looking for this casement operator. Can you help me cross reference it? I know it's made by Truth but it seems obsolete. I'm hoping I can find about 20 right and 20 left. Thanks Jeff H

Need new hardware to match the following: DNS Industries, 13/23 Outside Pull - Standard DNS Industries, 12 Inside Pull - Standard The locking latch seems to be lower down than the 82-008. Maybe the 82-002 or 82-002K would work... Thank you in advance!

Hi, I'm looking for some parts: 1. I need a pivot bar for a tilt out window. no markings on the window to tell what the manufacture is. the pivot bar is 3 1/4 inches long and is stamped 6247. Attached are some images of a good one: img_9629 & img_9630. 2. IMG_9525 & IMG_9626 are broken part ... (cont.)

aluminum single hung window. labels are not legible. approx. 3/4" across the top approx. 1/8" in the middle. longest leg is 5/16" short leg is 1/8"