Viewing all customer Discussions for:

Door & Window

Hello, we have two Pella sliding glass doors that we'd like to add key locks too. Not sure what all is needed to make this conversion. Btw saw this through Popular Mechanics.

I have some original 1960's aluminum windows in my home and am trying to find replacements for this pin that is used to lock the windows in a closed position. I have included a side shot and a top shot to show the spring that is around the pin. Several of the pins are broken and the windows can no ... (cont.)

I have three Peachtree Citation Sliding Doors. Two are standard sliding door width, and one is a large slider. When I pull the doors off the track and inspect the rollers it seems the rollers are not framed the same way as your Citation rollers and are about 9/16 wide, The screw to adjust enters ... (cont.)

No stamp on part number on original window. I believe it is a 380 or 385 but can't be sure. Is there anywhere else to look for a part number?

Need a replace for our jealousies window crank

I need the whole shebang - white or silver keyed handle set with lock - preferably low profile. I would also like to find a silver or white "oops" plate that hides the scratches on the inside.

Can you tell me what I need to order? Simonton windows. Nearly 50 percent of the windows in this house are broken, from a foreclosure. It's a spiral balance afaik, but I have no idea what parts I need.

Please look at the photos and let me know if there is a replacement for this.

Product code 30-115 will this work on a Marvin Wundow

I need 6 of thesel plastic u-shaped 1 1/2" high, goes on the bottom of mirror, wheel clip.

Hello, i have a balancer that is 24 1/2" of metal channel but yours dont come in 1/2" sizes. would i want to do a 24" or 25"?

I am looking for tie bar for interlock roller 18.9 (480.1mm) and plastic clips (holder) Thank you.

I need a replacement part. The dimensions are the same as a 81-125 (2-1/8" x 1" x 9/16") with a Nylon 1-1/4" largest dia. (1-1/8" small dia) roller. There is a stamp of D-719 on the part with roller. These doors are likely 30yrs old. Thanks, Brad

Here are some pictures about the truth window operator. Just let you know, there is a number on the arm which is 40051B, and also other number on the back of operator which is 45251.

I need 4 of these

Made by delmar Toronto

I need a replacement spring for my door, it is located in the top track approx 28" long

The exterior flat edge is 1 3/8" long and is 3/8" wide. Do you have this and how much is it?

I have a jeld-wen casement window that is missing both handles and covers. Can you please advise what parts would fit this. I would like a folding handle if possible.

Help help! Can't find on your site, House and screen 4 yrs old. Don't want to take screen apart Handy but not masochistic. Thanks Jeff