Viewing all customer Discussions for:

Door & Window

The lock body that resides inside the door on this model is the part I need.The spring that pushes the top lock part into the strike plate is broken. This is a Larson all glass storm door, BTW.

Hi Experts! I'm pretty sure that my replacement window balance is the S350-28, however, I don't know what the weight of the sash is. My old window balance doesn't have any markings on it to check. Do you have any suggestions for where to start? I did try to lift the window up before without th ... (cont.)

Looking for a replacement mutli-point mortise lever (square shaft) for a double locking latch on a Milgard glass patio door. Sliding door information is as follows: Series 5621 / 5631 AAMA / NWWDA 101/I.S.2-97 SGD-C30-96x96

I have a non-tilt window that operates with great difficulty. I removed the sash, removed the channel balances, lubed them and replaced. The window works better, but the left channel balance squeals and catches or kind-of ratchets like there is a stuck or broken part somewhere on a pulley wheel. ... (cont.)

This part looks like your 15-208 BUT it is only a tad over 1/2 thick (0.54"). If I deploy the "cam lock" that goes to 0.5920". Anything else in your catalogue that I could try? Thanks, Jay

My sliding glass door is approx 16 years old. The smaller lock that moves left/right does not function properly and I'd like to replace the entire handle set. I can't find a model number - only numbers are: "RD 1968 CAN" and "PAT3390557 US" I tried using a general replacement from Lowes, but ... (cont.)

This is a #2630 balance rod from a Clearview window. The company is out of business. The windows were installed around 1979. Looking at your website I think the series #351 with the top and bottoms 19-002 and 15-002 will work. Might not be a perfect match but close.

I am looking for the curved keeper part that holds the side opening window latch bar in place on our Accu-Weld Garden Window. The part is about an inch long with two screw holes. It mounts in the window casing area to hold the latch bar up and in place so the window can be locked and unlocked. There ... (cont.)

There is not any markings on the balance. The only paper label on the window is series; 1100/1450 SH AAMA/NWWDA 101/I.S/2/97. H-R40-44X84. H-R40-88

I am looking for these replacement parts for a Atrium window.

We would like to repair or replace screens for these windows. In particular there are clips or tabs (pictured) that hold the screens in the window frames. There are no markings or labels anywhere that we can find.

I am looking for Glazing Bead for my Victor Windows

Hello! We are trying to track down some parts for our older Alenco windows. we had some glass replaced and we think they broke the balance when that happened since the windows won't stay open. Can you assist us in tracking down what we need? Thank you sooo much!!! Lorie

Hi there! I'm trying to help my landlord replace my channel balances, and wanted to make sure that I'm buying the correct ones since I need at least 6 of them. The metal piece measures 23-1/4". I looked at the link for the S745-23, but am not sure about the plastic end pieces. One of the ends of eac ... (cont.)

I recently ordered 6 window sash guards because in 2013 I had placed an order for the 8-044, which I thought was the correct part. At that time I fixed those windows and thought I had a few left over but cannot find them. Thus I just reordered. When they came it it is obvious they are not the righ ... (cont.)

Need help with the following: Channel Guide Model - 28DS 42 Width - 9/16 Depth (less shoe & top) - 5/8" Length (less shoe & top) - 29" Top Sash Guide see dimensions on photos This is for the bottom sash of a double hung window aluminum frame window. 51" wide, double pane and pretty he ... (cont.)

I would like to see if you have parts for weathercraft Windows, I have constant force sprig/balances. The connecting end has a # 5 on it.the sash size is approximately 25"x25". See attachment. Thanks for your help Frank

right side of window window balance drops down. Bottom shoe broken need replacement...

Hi Could you please help me to find replacements for my 15" block and tackle window balances? I would greatly appreciate any help you may be able to render Best Regards, Jeff F