Viewing all customer Discussions for:

Door & Window

Locking for this plastic pivot shoe

I'm looking for a replacement worm/crank to fit a mi window 9700 series. I have attached a picture of the mfg label on the side of the window. I don't have the original crank as I bought it as is. Any help would be appreciated. Thanks!

Do you have this item in white metal? I bought 3/8 but just a bit too small.

Good afternoon, I need to replace mechanism for skylight Paeco, serial number 91471 (please see attached). Would would have in your stock? How much is item for ordering and shipping? Thanks, Daniela

I have a Patriot sliding glass patio door that needs new roller assemblies. The door was installed in the 1998 time frame when the home was built by Ryan homes. I would prefer to have the replacement assemblies in hand when I remove the door so it doesn't have to be removed and reinstalled twice. ... (cont.)

Question regarding the sash device 39-398. Once installed is there a quick way to detach the arm so that the window could be used for emergency evacuation? Also, will this device work on Milgard Sash Windows. Please advise

I am looking for an older Crestline, casement window lock. See attached picture. I sent another picture earlier. Bob

Can you help m located this clip in black. My son ordered it from you 2 years a go but he cannot find the part number anymore. I added the same picture in jpeg and pdf

I am looking to purchase your 21-105. However all the springs you offer online are either too big or too small the 2 closest ones I was able to see is products 21-151 and 21-156. If you could please offer some insight on which springs would fit best with this pin cap, that would greatly be appreciat ... (cont.)

Need to replace it. I can't seem to find it online. Measurements are 2 1/2 long (about 2 1/16 to screw); 3/4 wide Has one screw on top and one down the side of the "sash". The end near the screw is at a slight angle.

Window Opening Control Device Kit for marvin double hung clad windows

Either 2 ¼ or 2 ¾ Thanks Toni

Could you identify?

1. I have a Schwinco hurricane window I cannot reach the operator to open or close the window. The operator shaft is 5/16" in diameter and has 12 splines. Do you have a universal joint with a pole ring that will fit on this operator shaft? 2. If so, I need a straight four foot extension pole wi ... (cont.)

what is the purpose of the slanted portion on the bottom of a top sash guide?

I was wondering if you have are replacement corner like the one pictured? Brand is United window, and I didn

Do you carry this balancer hardware shown in pic The hardware separated from window frame. Tag that fell of side of window has the following numbers: 47 x 55 1/4 15608084*12*1*1.2 2 45 1/16 X 27 X 3/16

Having trouble finding the exact part. No name on window but they use Caldwell balances. Need several pair of Left and right. Hope the pics help. Thanks, Ken

Hello, I am in search of a door handle set for my patio door. I have found that this is what my current handle is. Product Code: 82-080 My question is, is this set keyed on the outside? Our current handle is not keyed from the outside, and I need one that is. Is this the right one to buy ... (cont.)

Looking for pictured clip, and 3/8" diameter jamb liner springs to attach them to...need 19"L & 27"L springs. I also need only the springs and clips, the jamb liners are ok. Any new info on these?