Viewing all customer Discussions for:

Door & Window

I am attempting to locate window locks for a Pacific Industries window from 1994. I noticed in an earlier post that someone from Fairfiield, CA was looking for the exact same part and supplied pictures. Were you able to help him?

This is where the top of the coil spring connects to the window. Almost every window in my 8 year old house has this piece broken. Cheap construction! I can dig out the broken piece of plastic. Do you have a metal replacement part? Thank you!

snap in glazing bead for kinro windows 3/4" about 5/16" need enough to do 5 window 20"x 20" can you help me in my quest, thank you for your time greg hamilton

I purchased the door about 10 years ago from Menards. I've done some research online and think it may be Crestline. I need to get it replaced asap. Thank you for any help you can give.

Can I get a replacement handle in rubbed bronze

Hi, We have a sliding glass door with a handle made by Dorwal. We need to replace the handle. The door is 1" thick and the screws are 3.5" apart. We need it to be keyed. We see you have exactly what we want NOT keyed. Do you have the same thing keyed? Thanks.

These came from CertainTeed Windows installed in the Turks and Caicos in late 90s or early 2000s. Can you identify and do you stock the part.

Hello, I am trying to replace the rollers for my Traco Commercial quality Aluminum Double panel sliding balcony door. I believe that the door model is Traco TR-8300 but I need to confirm since there is no sticker on the frame. The door is approximately 15 years old. The frame depth is 5 5/8" with sc ... (cont.)

2 types. v shaped goes on window sash and the other style goes on the window frame itself

Dear Sir/Madam: There are Simonton windows equipped in my house. They are 15 years old now. Some of them are with problems, such as the cover of coil balance broken. The attached images show the broken coil balance cover and the labels of the window. Can I get the replacement parts from your compan ... (cont.)

Would like a replacement that the handle folds in if possible Color required: white

windows are from 1980. Bronze color.

Rusco 22 inch, 5/8 inch orange tip spiral balance

Please recommend the snap in glazing. It is for a Viking window, build in the late 1980s. The attached photo is from a different window from another house, seems to fit. The height is ~7/16 in.

Hello - I am searching for this replacement part for a sliding window. Would you have them? If not, is it possible to swap it out for an alternative system? Thanks,

I need about 7 8ft sticks

I am a landlord, trying to replace a LH pivot set on an exterior mount 3-0 Manko commercial door at a post office building I own. Are these pictures enough for you to know what parts I need to order so I can fix the door from dragging on the threshold? Thank you for your time & assistance. ... (cont.)

Hi, the tension string on one side of the window broke. The balance is marked "25 5 AT CALDWELL". No other markings. Metal part is 26" long and 1/2" wide. The window is vinyl,double pane with a lattice insert. 44.5" wide, 28.5" height, 1.75" depth. I have not weighed it but I guess the ... (cont.)

I have Identified the two sash balance assemblies that I need to repair my existiing Patriot 2200 Low E windows but am reluctant to just doing the S.O.S. time after time. The windows are only 5 years old and are not abused. I have a couple of broken sash springs. They are your plain 30C and Plain ... (cont.)

I need to get some plunger pins for our screens. I hope you can help me get the correct size. The lower part of the pin (the short fat part) is 13/32 from bottom to shoulder and has an O. D of 5/32 (the bigger 7/32 will not fit). The part of the plunger above the shoulder is 3/32. The threaded part ... (cont.)