Viewing all customer Discussions for:

Door & Window

4 screens corners Identification on parts: Bayform DP307078 RD63647 Hi, i need your help.. Looking for 4 screens corners. As you can see on the photos, these corners have a a little slide out pin to maintain the screen in place. I need four of th

Enclosed are pics and dimensions for a 25 year old Phillips sliding patio door-9 ft. We are looking for replacement rollers for this door. Thanks for your help.

Greetings. I have attached 3 images. Looking for replacement sash locks and sash lifts matching these pictures.

Dear Sirs: As you can see by the attached photos I need to replace a broken screen door latch from a Pella Screen door. Although in fact I have 5 broken latches that need replacing. I believe your part # 83-155 will work. My problem is how to get the latch mechanism off. My screens were installe ... (cont.)

Please see if you have this in stock......please quote..... Thank you!..... Mike@ Baker Plastics work

I am looking for a (point striker) of a sliding door handle which is made in New Zealand. Would you have this part? Please, see attached photo? Let me know if you have any questions?

looks a lot like the 81-004 roller assembly.

I work on military housing throughout the country. I'm having trouble replacing these coil balances. The springs are stamped with 3,4,5 or 6. Any ideas?

Wondering if I can get hooks only. Thanks

I need this replacement part for a Pella storm door

I need to replace all the weatherstripping at a clients home. The windows are all casement style with a Kerf holding this stripping in. The windows are 25-30 years old. In the photo the bottom edge measures 1/2 inch. This edge site against the window frame, The bottom right corner to the upp ... (cont.)

Based upon the detailed measurements on your website I think I need a 29" channel balance (stamped 2840) with the 19-009 (7/16"x1/2"Acorn Top) and a 15-004 (15/16"x1 3/32"Winged Shoe) and the 18-041 (Acorn Sash Guide). My questions are: 1. Assuming my measurements are correct, do you agree with ... (cont.)

Hello Swisco, I believe I have a Series 390 2420 Channel Balance here, can you confirm? The channel length, of just the aluminium section is 24.5 inches though. Also need to know the part number for the piece that screws to the sash. thanks, John Mc..

WE HAD A HUGE HAILSTORM IN TEXAS AND MY GLAZING GOT DAMAGED. WILL NEED AT LEAST 70 LINEAR FEET.CAN YOU HELP ME PUT IN THE CORRECT ORDER AND WHEN CAN YOU SHIP AFTER I PUT IN THE ORDER? MAKE IS ALENCO. DO YOU HAVE ANY REPS IN SAN ANTONIO? ALEX

Hello - I have Malta windows and on many of them the plastic screen clips are broken. I ordered part 70-048 but the clips didn't fit properly. It fit in the window frame but wouldn't clip into the screen. So now I'm looking for an alternate option. It looks like 70-204 might be a good alterna ... (cont.)

Hi, I'm looking for a replacement crank handle and cover for Marvin CaseMaster window in taupe. Marvin's P/N for the crank and cover kit is 10898270. Do you carry original or replacement parts? Thanks

top lock to a lawson window

Have some very old, pre 1976, double hung Andersen windows and the sash cord broke on two of them. Can somebody identify the suitable part number for a replacement Sash Support Andersen Window Balance. It's approx. 6 1/4 x 2 3/4 with the following code - CC 4 25 85. Was also wondering if ... (cont.)

Hello, I would like to order some replacement window parts, I need one 24 inch spiral balance (see pictures). And one pivot shoe which I believe is part number 15-121. One spiral balance charging tool. I am uploading pictures however would like to order parts and will do so after hearing back fro ... (cont.)

I have a Pease Everstrait Patio Door. This Co. is no longer in business. I need the 2 bottom rollerS replaced. I am sending one to you. The top rollerS are metal and seem fine. Can I put metal rollerS on the bottom damaged ones?