Viewing all customer Discussions for:

Door & Window

Recently purchased part 39-539 for the purpose of replacing numerous plastic parts that were broken. The part comes with the metal arms and the part is correct for my windows. And the plastic part is only available in this configuration. The connection at the metal end is a rivet through a plastic p ... (cont.)

I recently ordered the Swisco 39-188, but my window won't close. Here you see the 39-188 against my old operator. What can I do?

Stamp is 29-5 30 inch long 5/8 inch deep 9/16 wide I have tried your model 377 2950 and all parts are correct but the springs are too stiff

Hi, Have no idea what brand this door is, but the measurements of the corner inserts, which have been removed, are 1" x 1/2", like on 95-214. I can't tell from the photo, but do the corners go completely inside the frame? I don't understand what that piece that runs diagonal across the corner and pr ... (cont.)

Length is 31". My bathroom scale measures @ 20# but could be off. Balance is 1/2"+ with ribbed profile. Spacer at top is about 1 1/2" long.

I need to replace or repair (cord and a hook) a window balance and replace the shoe. The marking is 1940. I cannot find it on internet sites. Please help to find the balance and a matching shoe. Thank you, Alex

Hi, I'm in need of at least eight new channel balances to repair four windows. The windows were OEM'ed by Viking. The channel marking stamp is 26DS 35. It is a block and tackle pulley system and the rail is 27 inches long with a width of 5/8" or so. The tips are not fully known, but one seems ... (cont.)

I need the opposite of the lock pictured. The sliding window in question opens left to right. 2.1/4" screw holes. Aluminum window. These locks are different depending on which way the window slides.

Bezel has 3 numbers on the back side. S2573553 W2673554 7125B-3

I am looking on the inside of the window crank handle (that looks exactly like the item I described above) and it has imprinted: 15393 Truth US Paten 361190 5560682

I am looking for replacement channel balances. Attached are pictures of the ends. Aluminum piece that the ends attach to is 22" long and 1/2" wide. Stamped marking is 2140 EE also a b.s.i. Stamped in it. Comes from a window master aluminum window. Can you identify or do I need to send you a sampl ... (cont.)

Has the number 11600-17 on it. It's about 6 3/4" by 3" by 3/4" Please see pictures. Regular hung window. Harry

I am looking to replace the window balances throughout my house. Two of my windows have 1700 and 1600 stamped on them. I do not see 00 as a weight option. What would be comparable?

Need to replace latches on Traco windows. Left latch shown out of the window. Right latch shown in the window. Measurements: 2 15/16 long, 13/16 inches wide, and 5/16 inches deep

How do I know which stamp option to use. Our current balances have nothing similar stamped on them. Thanks, Lori

Window company suggested I might need a Block and tackle balance? Window type: NVR1 NVR BLDG PRODS - ENON VALLEY 9/04/03 18SH30902A-AH09 2852 1800J SINGLE HUNG 33 3/4 X 64 3/4 WHITE 6/6 GRILL 3/4" LOW E GL 688674 002353990

I am a landlord trying to get a unit ready for rental and have HomeCrest Cabinetry and a lot of the hinges will not keep the cabinet doors closed anymore. Attached is the photo of the actual hinge. Can you please identify which hinge / part number that I need to order. Thanks so very much. Please gi ... (cont.)

Hi Jammy, I called this morning regarding coil housing 15-087 and 5 lb series 152 coil balance S152-5. You told me that S152-5 doesn't associate with 15-087; and you want me take picture and send to you. Please take a look the following picture and hope you can help us to get correct parts.My husb ... (cont.)

Hi, I am looking for replacement sash balances and I identified the 29" 380 series as the one I need. However I don't know how to pick the stamp option. I don't see any match with what I see on my current balance (see attached). Can you help me pick the right one? Thanks, Vineet

I need the screw part of the crank for a casement window. The window is on the right from inside, but there is an L on the right arm of the mechanism. I can crank the window open, but when I crank it to close, it stops an inch or two short of fully closed. The last thread of the crank screw is wo ... (cont.)