Viewing all customer Discussions for:

Door & Window

Hi, could you help me to find a strike plate for my Larson screen door. The plate is 7inch. long, 3/4 width and 6 5/8 from center to center on the screw holes. Sending you some pictures.

We need to order 2 of 39-205 11/32" Crank handle 2 of 39-107 Operator cover But the finish on these parts we are looking for is the one we attached to this E-mail. It looks like "Greenish Gold" Do you have the crank handle and operator cover in this finish ? Your prompt reply will be gre ... (cont.)

my Rollyson Patio Sliding Door needs a complete screen assembly. Can I buy a replacement at lowes or Home Depot, perhaps a genric version? Thanks Bob

This is from an andersen window and i think it is from the early 1980,s Any help would be great

This is the glazing bead on an Anderson 3-lite slider. It is for the center panel (picture or fixed) and goes with 3/8" glass. I don't know the age but I am assuming the 80's.

I have milgard window the balance is broke the number on balance is 26 4 IT CMC 4 witch one do i need. thank you

I went to Home Depot looking for a replacement for this part, but all of the parts had an extra part on the side with a hole in it, obviously to attach it to something with a screw. This part doesn't have that. The part says "Del Mar Eng Long Beach" and then what looks to be an unreadable patent n ... (cont.)

The top is secured by a single screw but I don't see how or where the lower spiral part connects as they had fallen out with the free end resting on the sill. 5/8" x 29". No identifying markings could be found. These are older replacement windows. (Central Florida) Aluminum single hung single gl ... (cont.)

looking for this screen clip

This is a guide for Truth casement hardware. Any suggestions?

the number stamped on it is 138 the dimensions are 2/14 inches long, 1 inch high, and 9/16 inches wide

Hello, You guys helped me identify the spiral balancers I needed in my previous home I just sold and hoping you can identify what I need for window(s) in my new home. I cannot find a manufacturer name on the windows so I cannot provide this detail. Hoping you recognize the window or the spiral bala ... (cont.)

I need to replace some pivot shoes in my tilt windows. Cannot identify window manufacturer. I am original owner of a Pulte townhouse in Timonium, MD built is 1995. My current pivot show measures 2 in. (length) x 1.5 in. width with a 9/16 in. thickness. I am also going to replace the spiral ba ... (cont.)

I have several casement operators that need to be replaced. Can you advise as to the appropriate replacement models / process for retrofit? The mechanism appears to be located inside the wood frame. For completeness, I am attaching a photo of the locking mechanism as well. Thanks! ... (cont.)

Part # 2730k 28" Do you have replacements?

Hello, We are looking for an id and price for quanitiy two rollers for this patio door system. the wheel is 1 /2" dia 2 1/4" wide x 15 1/16". Thank you

Louisiana Pacific window, part number 20156R . Manufacture of part is Truth. Deminsions are 21/2" wide, 3" high

What size is the slot? Thanks

1.25" wide 2" long .25 or 9/16 thick? Need 10-14 replacements, can you please identify, do you have in stock, and price? Thanks, Jon

Hi Swisco, I need a couple of the balances pictured. Is this enoiugh information for you to identify them for me? Thanks, Winston