Viewing all customer Discussions for:

Door & Window

Hello, Thanks for letting us ask questions. I have broken window balances marked as 33G. I was so happy to find your website but i can't see 33G model. Is there anything you can provide or should i order 33E model and replace the broken parts? What do you recommend? Pics are attached. Thanks, ... (cont.)

Attached are four pics. Can you help identify. Need four slides

all inside mechanisms crack so windows will not open properly or slam shut there is a metal part, a white plastic part and pulley of some sort White plastic piece approximately 1 3/4 " x 3/4" Round metal piece approximately 1" ? One pick shows metal broken mechanism Thank you for any help...none ... (cont.)

the balances are for non folding windows I have attached photos the number on the balances is 2230 Q they measure 1/2 inch wide by 24 1nches long including the plastic ends the house was built in 1986 and these are most likely the original windows i can find no labels on the windows identifying the ... (cont.)

I have several vinyl windows all with broken vinyl locks. I purchased SilverLine Casement Locking Handle 2-3/9" (38-090) from you a while back. It fit and was a good replacement, however I prefer a metal lock if possible. Is this metal? Do you think it would also fit?

Can you identify a suitable replacement part? Its an aluminum frame sliding patio door, wheel is 1.25 in. Thanks!

Hey Swisco, these are the pictures we spoke about. I will send pictures in 2 emails. I need mechanism and crank to open window, tide bar and guide, and also window lock. #7479067, #7479068

I have a house full of these same nuprime windows. And I finally have the time to do some repairing. LOTS of them have parts that need replacing. And there's one window with a cracked pane. I spent a while this morning unsuccessfully trying to remove a window. It was very easy to pop out ... (cont.)

Please see the attached pictures of Care Free window brand windows that I am in desperate need of help to repair. Thanking you in advance for your prompt attention to this matter. Lori

I purchased top sash guide # 18-009. This appears to be the wrong top sash guide. I also purchased S395-29 series 395 channel balances on order # 722928 which seem to work. It appears I need a different top sash guide. See the attached photos. The flat top piece is missing from the old top ... (cont.)

Multi-Point Strike Plate Product Code: 89-042 i don't see a metal cover in the middle of keeper. Is it comes with it or not? Please send me a text if you can. Thank you

Part. Slide bolts for storm door

Please see the attached pictures. I don't think I can put into words anything useful except that I am looking for this part. It is used in for the grille inserts in my windows. Please let me know if you need more info. Thanks, Louis

The markings on the window appear to be SNE IGCC (r) CBA IGMAC WI Thanks!!

There is NO STAMP on my current window balance....How do I determine the window sash weight?? Thank You.

I need a right and a left 39-028 crank in dark bronze. I only see 1. Do you have both

One of the left tension cords broke and i have to repair it. I have removed the left side sash balance tension cord unit(I left the right one one for now so that there is some tension on the window sashes until i can replace both tension cord units). The markings on the unit are: E43 9P27 377 ... (cont.)

30" Series 380 Channel Balance Product Code: S380-30 Not certain as to the strength of the spring. On the old channel balance there is a code of "29C USB" That is the only information I can locate on the metal arm. Visually all other aspects match up to your diagram on line. I will be pur ... (cont.)

I have a larson storm door it is an older model. The mortise lock 40-183 set looks just like the one I have Infact,the key tumbler thumbturn 40-089 is the same.Do you have lock sets that fit larson doors. Also I do not have any numbers to send.

Your 15-177 shoe looks exactly like those I need to replace except that the brake looks black not slate blue. Is that from age or is mine a different part? Same dimensions Thanks John