Viewing all customer Discussions for:

Door & Window

Hello - I just wanted to double-check before I place an order. The distance between the two bottom holes is 1 3/8" and the distance between the top hole and the bottom hole is 5 1/4". The arm that connects with a clip to the window has a little bend to it. I'm thinking that your part 39-194 RH is ... (cont.)

I need to replace the left tilt latch on this window but can't find any indication of the name of the company that manufactured the window. I'd like to start with the manufacturer if possible. The only indication I can find is a "world" marker on the frame. Does anyone recognize this manufacturer? ... (cont.)

Please help me to identify the part, those pictures were taken when the part on the windows.

I did a live chat with a Larson rep and she said the part number I need is #35498. This is a black handle assembly for a Pella storm door. I did not see this part on your website. The door registration number is 03258380567 1245. Thanks.

Please help identify this part

We have tried to find these rollers for our patio door which is for our 1998 travelaire park model trailer. could you please contact me as I would like to have them delivered.

I am trying to locate a set of side sash mechanisms for a Vantage 1 single-hung bottom slider window. On the window unit sill tag is 287-N-024. These side mechanisms are actual metal channel length of 13.62" and have the numbers 13 3 and BSI and a small op stamped into the channels. They are th ... (cont.)

the overall length of the pivot bar is 3.25 inches. My concern is the part number 26-366 may not have adequate length to function properly or not fit into the cam at all. All other measurements appear to match. Please advise whether this should work, or if you have another better suited option. ... (cont.)

I need to replace a 9.5 inch Caradco window crank. Just want to make sure I order the right replacement item. Mine is a 9.5 inch arm (part #40754) The part that attaches to the window is part #20755 Thanks, Brian

Is the 90-095 latch a surface mount or do i need that routed hole in the sash? If this is surface mount then I will order ASAP =- if not then please advise me on what other number you suggest. Center to center on the screws is 2 inches. THanks John M

Hi, I am currently looking for a TRUTH manufactured 7 and

The 2 pictures attached show an Anderson Window Balancer I'm looking to replace. It has two cords, the one for the inner window has broken. Markings on the balancer include the Anderson Logo and the following Letters & Numbers D35 7P27376. Dimensions of the balancer are: 6-1/4"L x 2-13/16"W x 3/4" ... (cont.)

I believe I have Marvin windows on a recent home we purchased which use flush cranks. A couple of the cranks have broken and I'd like to replace them. I have attached a picture of the broken crank handle, which folds and fits flush with the crank cover on the window. Is the 39-107FK a suitable re ... (cont.)

Hello I have 2 windows hopper style, each has 2 locks on each side of the window shown on pictures. Missing handles on both. I wonder if you could identify the part. Thank you Oz

I have door off tracks and rollers unmounted. Can't find replacement rollers in area. Can you help me. Other than Guardian tempered glass on the glass have not found door makers name.

I need six of the attached plastic window clips. They look like a little box for the screw with a piece sticking out that slides into the window frame and holds the window in. There are four to each of the single hung aluminum windows

Window Balance, Replacement - for Pella Single Hung Vinyl Sash window'' Pella SN 6 692821 01 (08SEP2005) (right side from inside house). window balance channel is stamped with 3240 The top pin holding the spring has broken (pin is supposed to go through side to side) Window is vinyl Doubl ... (cont.)

I need to replace several balances in my windows that have no marking and I do not know the manufacturer. The length of the tube is 27 7/8" and the diameter is 5/8". I have included a picture of the top portion of the tube. Any help that you can offer would be much appreciated! Thanks! Kristy ... (cont.)

I've got a number of older (2002) Harvey Casement windows where the plastic "track" part in the upper hinges has snapped apart so the windows won't open properly (the top part of the window pop outward). Havey has shifted to a new metal version (which they sent me) but they are a different size an ... (cont.)

4 inch sliding window stop missing right end point. Tilt corners have damaged pivot ends