Viewing all customer Discussions for:

Door & Window

I need two of these balance shoes for tilt window 24" Channel Balance

Mesurment of part is 3" x .75" depth is 1.5".

Dear Sir: I have a 40+ year old IDEAL brand out-swinging door handle set that I need to replace. The inside latch broke and I lost the spindle spring in the process of removing it from the door. No model numbers appear on the parts, only U.S. and Canadian patent numbers. The t2 screw holes are 1 3/ ... (cont.)

I'm looking for Snap in Glazing for an alenco window (1990's) - thought it would be easy but looks like there is a ton. Is there an easy way for me to find the glazing I need. The window (and glazing) are gone. - Can I tell by looking at the glazing next to it?

I am looking to replace the spring pins shown below.

for ROW window

I looked at a vinyl single hung non tilt window that is missing both sash balances. I took the picture of the sash balance in the window next to it. The markings on the balance are in blue ink and one says 25.5 DW CMC 11. The other says 25.5 CX CMC 0. The balance is 1/2" wide and the metal is 25 ... (cont.)

My screen door uses the same wheel as your part number 84-016. I have ordered several of these as replacements. Is there a comparable part where the center insert is made of metal instead of nylon? The nylon center "bearing" (for lack of a better description) keeps breaking. Is there a more rugged b ... (cont.)

Hello, I currently have a Spiral Balance that is "aqua" in color. The window weighs 15 pounds. I'm looking to replace with the correct weighted spiral. Quite a few of the window spirals and boots are broken so I want to be sure that the spiral can lift and hold the window. (we will be purchasing ... (cont.)

I am looking for windows Balance mechanism and Pivot Bar for my Milgard window. It looks like your site is not able to except another pictures.("add another image" does not work) Could you please help me identify the part number which I need to purchase. The broken Pivot Bar total length is about ... (cont.)

I have some 3050 vinyl windows with double pane insulated glass. They have S180 style coils and what looks like your coil housing pivot part number 15-087. These are single hung windows and were built in 1995. I do not know the manufacter. I may have to cut part of the track out to remove the co ... (cont.)

Hello! I need to replace two 32C tilt window balances but the shoe size is 1 inch and you only have 1-1/4 inch available. Is there another balance available that I could use? Could I use the 3200 with the 1 inch shoe?

I have an Andersen storm door 4000 series.I'm in need of some screen spline. Will the 55-109 work for this? It looks very similar to the Andersen product.

ock for florida extrudersunit

What is the range for which both sides can be mounted apart while still functional? I have thick weather stripping between my two front doors and would need a gap of approximately 1 and 3/8" between both sides of the hardware. Many thanks.

I need a replacement for this Superseal window operator and handle

I need to replace my sliding door roller. There is Del Mar on the part but no part number. I've sent pictures of the part needed

Please see pictures. I have not taken the existing Glazing bead out to replace the glass as it may get damaged doing so. If no replacement, I am stuck. It's from a Crestline sliding window from about 1985-91??.Shows 1321121 and Crestopane 81-91 on inside of alluminum glass divider strip. Glazing str ... (cont.)

See picture - do you have this size?

I am searching for Wright #30774 casement operator