Viewing all customer Discussions for:

Door & Window

The shiny part is a tad over 2 inches by 1-1/2 inches. the part with roller is 2 inches by 1-1/8 inches. the roller is about 1 and 1/4 inches. yes, I'm a girl. and I was very disappointed to go to your store in Camden, NJ to find it closed permanantly. This is an old door, probably when the house wa ... (cont.)

I need two 30 inch Balancers . Markings on existing 2919 BS1 R M . It has a 1/2 inch channel, the top looks like a 19-005, the bottom like a 15-002 or 15-001. The color is like the 15-002.

I have two anderson windows with the same problem. One opens the opposite way of the other. Do you have replacement cranks for this? Thank you.

See picture, I didn't see one that looks like it on the web. Please advise if you have an replacement. Thanks Elton

Looking to replace broken LH crank,color white. #10898590 Thanks. Kurt.

Hi, I have grilles held in place by plastic clips. they measure 1/2" x 1/2" and the pin section angles out about 15 to 20 degrees to accommodate the cut angle in the grill slat.

Here are pictures of the top and bottom of the channel balance I need to replace

I'm interested in purchasing replacement locks for Certainteed and Acadia windows.. Please see the attached photos. Looking forward to hearing from you. Regards, Allison

Hello, My house is from 1986 and some of my windows need crank replacement. The most critical one is the bathroom one. The information Iwas able to get from it is: Entry gard "Truth" on arm #20755 9/85 Etching on window I will need the entire mechanism: cr5anck, gears and scissor arms ( dua ... (cont.)

This roller looks like the 81-133 except the 81-133 has a track cleaner that looks like it adjusts up and down and mine does not have a track cleaner. the other measurements are the same. will the 81-133 work?

Need help with balance choices

Help matching this operator, thank you !

Looking for replacement beading for my windows

I ordered replacement channel balances - 19", series 377, 1840 - but have two questions: 1) Is it OK that the replacement is 1/2" longer? Exactly the same otherwise, including the number stamp. 2) How do I get the tabs on the side of both the top and foot pieces in the channel slot for them? ... (cont.)

I have a Acorn lift window 2. It opens but will not stay open. Please see attached photo. Do you have this item available?

The 40-058 looks (and measures) identical to the old set now on the door. But the door is 3/4" thick. Will this work? Can I adapt it by trimming the bolts or spindles? Better yet is there a 3/4" version?

I need to replace a total of 18 channels, of three different sizes. I believe I have figured out what I need, but I would like to be sure. Attached are some pics of the top and bottom pieces. The top piece appears to be 19-005 and the bottom looks like 15-005. Would you agree ? Measurements all ... (cont.)

Good day, I am trying to rehab my 1960's sliding glass and aluminum patio doors. It has a plastic piece that gets screwed into the top rail of the door. That would help keep it centered in the aluminum track above and not clanging back a forth when the wind blows. I am also looking for more of ... (cont.)

I am trying to find a replacement part for this window sash lock. Jerame

Hello, I have a window crank that I believe is similar to your part number 39-090. My problem is I