Viewing all customer Discussions for:

Door & Window

I need fold down cranks to replace this style of crank. I believe it is the bronze color but they are a light beige/bronze color. They are not an oil rubbed bronze color. I need to get 9 cranks. Can you send me a pic of what you would suggest? Can you send me a pic of the color that you believe ... (cont.)

Good morning, I'm trying to find a couple of wheels (or the assembly) for the roller assembly for a 20-30 (?) year old sliding glass patio door. The base of the assembly on the door is approximately 1 3/4" x 1 3/4". My best measurement of the wheel itself is an outer diameter of 1 5/16" and the d ... (cont.)

This piece rides in the jam liner. The bottom hole receives the pin from the sash, the top plastic loop (broken) receives the coil spring balance, the red screw I believe adjusts the pressure. Anyone know where I can get these

I have a broken channel balance but was able to find that part (S351-31), but I'm having trouble finding the correct sash guide. I think it may be 18-018, but not certain. Can you take a quick look at the attached and let me know? I'm not sure on the make/model of the window - it's an older home ... (cont.)

Hi I am looking for snap in glazing for vynal windows are windows are old the glazing was damaged when the glass was smashed it's hard to find.

I'm trying to find a replacement lock for an old 22" x 48" window and I'm not having much luck. The original manufacturer was Alenco. Do you guys have anything that could replace one of the broken locks? Attached are pictures of one of the working locks. Size of lock is about 1" x 1 1/2". All I ... (cont.)

I am going to order product code #38-091. On the old part there was black piping on the inside of the main housing, a type of a seal? Does that come with the part? If not what do I use? Larry

I cant get my casement window to close properly. The bottom grabs the tie bar but not the top. the tie-bar is about 48" long. I have about 7 windows like this. The company that put the windows in went out of business. I am somewhat handy.

I need a replacement for my Casement window multi-point lock. I bought them from penguin which has since gone out of business. And do you have it in the bronze color?

Hi, I am having trouble uploading a picture so I was wondering if you could help me with a Truth 45034 .... Has about a 12" Inch arm.

The best I can tell I need a S380-25. However the stamp on the old balance is 24 9. Which replacement do I need.

The operator arm has a few numbers on it. They are 6D 304 OPO5-1509 2 The most unique thing about these operators is that the operating tit is in the handle. The handle appears to insert into a snap collar on the operator.

Wheeler brand window plastic end to spiral balance

I have a right and left failed latched for a window. Can you help to identify part number for both. Thanks

Please identify the pivot shoe. Thanks.

Hi, I need help finding an exterior storm door handle to match my current interior one. It has the 5/16" square post and all the standard ones wont fit or match the holes on the current door (too small to reach latch) Thanks !!! Sue

I would be needing four of these for the tracks on my sliding glass doors

My closet door is 1/3/4" wide I need a replacement closet door glide. All the ones I can find are adjustable up to 1 3/8" Where can I find one to fit my door. Door used to have a screw type notch that was screwed into floor. I added hardwood floors and had to trim closet doors. Now need some ty ... (cont.)

Swisco.com I have a vinyl double hung, double glass, tilt inward replacement window with broken 1/2 inch coils on each side. I removed each broken coil from each of the tracks and they are both stamped 7FB. There are 2 holes at the top end that were attached with a mounting bracket that looks ... (cont.)

Hi, I need a sliding glass door handle in black. It is 7 1/4 " in overall length with the screws at 5" apart on center.