Viewing all customer Discussions for:

Door & Window

I need to replace two of these and cannot identify the manufacturer of the door.Maybe 84-050? These are from 8' tall doors.

I need to replace this part for my window. I cannot find a part number on it so I am not sure it is even an Andersen part. Do you have anything thatmight work? It is all hide under the window sill when done. My home was built in 1965.

My window has a round hole where the take out clip should be installed. Since I can not install take out clip 16-002, what do you use to hold the channel balance when you install a new one? How do you take out the old one if you have to replace it?

I recently purchased replacement S710-18 channel balances for my Alcan windows. The dimensions of the metal component of the replacement balance is identical to the original balance. The foot and top clip are different. I have attached photos showing the differences. With the replacement balan ... (cont.)

Please see attached photos and let me know which replacement balance I need to order. Depth is 9/16" and width is 1/2", length is 33" (without fittings).

Looking for a channel guide, but unable to match it up on my own. I am willing to change both guides if needed. Thank you!

Need Sash Lock for Visions 2000 vinyl casement window (RT) As you can see, the shaft of the latch broke.

Would you carry this window crank and the bars from window to inside. The piece that is on my window sill is stripped and when I put in the crank, it will not crank out. I could use the cranks also.

I need to replace a lot of pivot lock shoes in my apartment windows. They are all broken. I am not exactly sure which ones I have. I just know that the size is close to an inch and that the spiral balance has a green tip. I am looking at your 15-187 . Please tell me if I am looking in the right dire ... (cont.)

Please help me identify the exact parts that I need for my Peachtree windows from the late 1980's I have D4260 windows for which I need (6) balances. I have D3660 for which I need (2) balances I have D2460 for which I need 10 ballances

I need to find screen corners to match I need at least 8

I'm seeking to replace the two bottom assemblies/rollers in a marine sliding door application. I believe the original item is a PE Delmar, SF1. It has a 1.25" dia nylon wheel, length 1.92", height 1.04 width .052 Can you help?

Looking for this part for a Rivco screen.

NEED 1 EACH WINDOW CRANKS

can you i.d. this latch for an Atrium window, and replacement part? thank you.

Been trying everywhere to find these with no luck. Please help. Thanks so much.

I will be purchasing one of Product Code: 39-054. What are the other accessories I will need? It looks like I need 3 screws to attach the operator to the window frame. Which are these? Also, what fastener do I need to connect the operator arm to the corresponding arm on the window? Do I need an ... (cont.)

Not sure if this is enough to identify what kind of handle this is. This is from a sliding 3 panel door. I believe the door is from the mid 1970's. Any help would be great. Looking for a more secure replacement.

This is from a 1997 CertainTeed Carefree window on our doublewide. Need 2 of these one for each side.

Hello, I need an extension for a skylight window crank. I notice you have 2" crank handle extension 11/32" #39-337. The female opening on my crank handle measures 3/8". Will this extension work for me? I tried a 5/16" extension and it was way to small.