Viewing all customer Discussions for:

Door & Window

I'm looking for replacement operators for Caradco awning windows. The glass measures 42" wide. When retracted the arms are approx. 20-1/2" wide. After browsing your web site I believe the correct part is Model 39-083. Before I order I was hoping to confirm. Also, how do I remove the actuator? There ... (cont.)

Hello, My townhouse has Patriot windows. Most of these windows have developed an issue in the same place. The screw on the photo doesn't hold and the rod (?name) doesn't stay in. I think they were probably over tightened when assembled. Also, the lubrication wasn't good enough and this contri ... (cont.)

Hi this are the photos I took for the part. will check today when I get home to take measurements and will place new order. If you know exactly the part Number just by looking at the pictures, please tell me item number. otherwise will contact you later. thank you very much.

How does the handle connect to the operator spline shaft? Is it a press fit? If it is a press fit (without a set screw or pin to hold the handle in place), if the handle requires replacement (loosens), is a new handle required (or the best option)?

the pivots and threshold are shot and I want to replace them. Do you have the items in stock and what is the cost? The building design was 1986 so construction was probably 1986 or 87. Also how does the coor come apart to install the pivot mounts on the door itself? From what I have read o ... (cont.)

I am trying to find a replacement balance and shoe for an older double hung window (15+ years). One of the shoes just broke, but I would like to replace both side while already in there. The sash weighs 16lbs The existing shoe is 2" H x 1 1/4" wide. The color on the balance tip is yellow. A ... (cont.)

need two new corners for sliding screen door just bought 2 new rollers through you item #84-101

Hi guys! Looking to buy this handle fror a window in a bathroom, not sure about the brand (please see second pic) The "legs" of the piece are about 11/12", the handle part is about 5. Thanks! Mario

I have 4 spiral balances that are 30 inches in length and 3/8" in diameter. They are for tilting windows that have a sash weight of about 30 lbs. . When I removed the balance the spiral fell out. There is nothing broken on the spiral and there is nothing inside the spring to hold it in. The balance ... (cont.)

Greetings, I need replacement crank handles for 4 windows. As far as I can determine from the Andersen History catalog/document, these are Andersen Strutwall windows #4863. I am attaching a few photos to aid in identification. As you can see, we are in process of installing these windows w ... (cont.)

This is from a Sears storm door(Model number unknown 9yr old door)with a double hung sliding window upper corner key I seen other types of Swivel Key on this site but none simpler to the ones I have need please see the three pictures attached for the size and shape THanks, Walt

Hi, Can you quote me for the part as per attached photos? Joanne.

My house was build in the 80's with Anderson double hung windows. I need to replace a number of the sash balances but the numbers do not match any of the replacements. The number on my existing sash balances are BL10# 314 8?. Can someone tell me what the replacement sash balance will be for the ... (cont.)

I think I need replacement part 39-031 but the smaller arm is not measuring 4 7/16. It measures 3 3/4" Is there another part with those dimensions? Sue

I need 10 pcs total Top 1/1.5" (little less) Bottom 1/3.4"(little less) Height 0/5"(total) I was looking your website and the semilear part # 87-010. Or 87-099, So please help me for correct part

I'd like an ID of the glazing bead in the attached photos. Also, when reinstalling the new glazing bead (and the old glass pane) in the old aluminum frame, should sealant be applied on the inside edge of the glass pane on the interior-facing side of the frame? If so, what type of sealant? (I liv ... (cont.)

I looked over the web page and could not find on my own one that matches exactly with my broken ones. Do you have any recommendation? Thanks.

I purchased the Larson Storm Door Sweep #40-209 and it is too short....does not cover the bottom of the door where it meets the floor. I need a sweep like the 40-209 to be 3/4 inch wide. Do you have one. Thank you.

The school was built in 1957. The balancers are of a spiral type. The clip shown connects the spiral to the window sash. Pictures of actual window and spiral balancer. Ed

I am looking for replacements for the cranking mechanisms for my windows in an adobe house in Taos, NM. It says Wright as the brand and is listed as 07900. The body measures 3 1/2 inches. Could you tell me where I could find these? Thanks, Sally