Viewing all customer Discussions for:

Door & Window

I am looking for a replacement mechanism to hold a door shut and or the replacement spring to make this work again. Plate is 5.5 inches long and one inch wide locking bay 3 and 1/8th wide 3 and 5/8 tall and half inch thick The broken spring is half an inch spring body(the coiled part) and two ... (cont.)

I need casement window operator left & right the code I have is MBC-304 series SECA/SEAW

Do you have an installation instruction sheet for a MW 82-226 : Mortise Lock, 4-5/8".

Can you Please help me identify this Anderson Balancer? It has a paper label marked C78-6#236-82. Also, stamped on the two sides are 11600-2 and 11600-3. I have attached an image of this window. Thank you. Bill, Owner Handyman Services Company

1 1/2 inch x 1 3/4 inch. 2 screw holes. stamped 1556-2

Need L & R balances. Markings on L balance as follows: D8 7#27 3 80 Also stamped with 11600-2 and 11600-3

My balancer has a white tip and no markings on the tube at all. It is a 5/8 X 24 tube with a white tip It is out of a non tilt window What part number and description do I use?

Dear Sir or Madam: Photos of the original part I wish to replace are attached. The markings read: 25 4 DV CMC 7 The metal channel is 26-in long with hemmed edges, cross section dimensions are 5/8-in by 5-8 or 9/16-in depending on which side you measure. I can provide more detailed dimensio ... (cont.)

Hi, we have a 10 year old California home with an 8 foot tall by 5 foot wide vinyl sliding glass door (dual pane). The door has become very hard to open and close. The track below is made of a hard plastic or vinyl with a round metal bar that goes from side to side (that the door rolls on). The ... (cont.)

The patio door doesn't lock well because the hole in the frame has rounded out. Do you have something that we can use to solve the problem? Some have suggested replacing the entire door but the glass is fine and so is the rest of the frame. Thanks

Hello Susan, Please see attachment, you will find the parts in questioning per conversations with Patrick. Thanks, LaQuita, Manager Franklin Square Apartments

Hello! In the past I searched for Rollyson parts and had given up hope and figured replacement windows will just need to be in my near-future plans anyway, so I would just live with the problem windows for the time being. After a long spell of living with malfunctioning and drafty windows I decided ... (cont.)

Looking for replacement shoe for Bonneville sash installed about 10 years ago mark on balance says "(03/12) UNIQUE 27 HD" Black shoe width is 3/8 inch height is 1 3/16 inch Thanks

your prices are great! I have a 28 inch tilt window spiral tube balance....four need to be replaced...when I try to get the window out and twist it doesn't come. It looks like a horizontal shaft going thru bottom of window with ends seated into female shaft mechanism below where balance slides in... ... (cont.)

Hi, screen frame corner: . plastic . 1 and 1/4 inch long . 3/16 by 3/16 body . characteristics .. winged tab that extends to 1/4 inch, one side only on top .. ridges (6) screen/door clamp: . 1 3/4 by 5/8 inch . screw is 1/8 in diameter . aluminum (very pliable) Thanks

Is this also made in stainless steel & on back side of housing what kind of screw is it mine is a 10-32 like the top one

We need new rollers for our Traco sliding glass doors. I've included photos of the roller parts both separate and put together, along with some dimensions. Please let me know if you have either exact replacement parts or substitute parts which will work.

Old patio door at our rental property that has broken latch and odd size I've not been able to find anywhere. Saw one one your website that looked close but key hole looks low. Not being able to access keyhole may be ok as long as can latch it from inside manually. Would appreciate any advice. Inter ... (cont.)

I'm new to your site. Recently, my father passed away, and I'm settling his estate. He has a house built in the mid '80's (I'm in the process of selling it now) that has Andersen double hung windows that when raised, the sash cords don't retract. Is there a way to lubricate the balance instead of ... (cont.)

I need new sash balances for Andersen windows. The number stamped on the sash balance is E36 9#27 2-86 Can you help me identify which part I need?