Viewing all customer Discussions for:

Door & Window

I have a 30 inch channel balance that needs replacing. I have identified the top as a 19-005 and the bottom as a 15-002. I do not have any identifying marks on the balance itself. do you have a product that will fit my needs? Thanks in advance

I am looking for an anderson part that is for a crank window. The part number I have is F-9400-8A. I have seen where there has been discussion about it on this site but how can I get one? Thanks.

Are there any instructions for installing these clips? The ones I have WILL NOT close flat, and fall out of the screen. It seems as if there should be a notch or indentation within the scrren frame into which these should be secured.

Vinyl Snap-In Glazing Bead I pulled a piece from my windows I think windows are Pennco aluminum I took some pictures

I need to replace 3 BiltBest dual arm operators at our facility. The long arm measures 10 7/8" and the short arm measures 6 13/16". Do you have any with these measurements in the EntryGard operators?

I have identified these parts as a spiral window balance of some kind. I am, however, at a loss as to where to find these. Any info would be greatly appreciated. Thank you

what balance should i order if my Anderson balance is stamped : 11600-17 11600-3 and BL8 10#31 5-85 visible glass, non-tilt windows manufactured in 1986 27"x32" glass

I'm searching for vinyl glazing like the picture attached. 3/4" x 1/4" Thank you,

I am trying to find replacement parts for my sliding window. The inserts are 1/2" long and around 1/4 wide. Please see attached photos. I have been to Home Depot, they referred me to your website. I don't know who made these windows, purchased this condo 2 years ago.

I'm looking to repair a number of screen and storm inserts. Mostly the corner/latch parts are broken, but some of the top corners are also broken. It appears your parts 91-005 and 91-004 will work for the latch/corners and part 95-004 will work for the top corners. Do you agree? I take it the sp ... (cont.)

I am unsure of the stamp option to chose for my 4 channel balances that have to be replaced. The best fit seems to be 35" Series 380 Channel Balance Product Code: S380-35. The stamp on the original says 34-5 GA2 CMC 19

Balancer is broken on the LHS of my Anderson DH window. The string does not retract for the lower window, probably because the tension spring is broken? Can I purchase a replacement balancer for the LHS? both sides are numbered 11600-17 LHS has E47 9#27 10-86 RHS has E52 9#27 12-86 ... (cont.)

The grooves attaching the handle to the crank have been stripped and it will no longer remain seated in the cranking mechanism. So instead of opening the window, turning the handle simply causes the cranking mechanism to come attached from the window. As far as I can tell, the whole mechanis ... (cont.)

Hello, Your how-to instructions for the sliding glass door on the website ... Wryte Stuff.com ... are great and very helpful. However, I am having a problem removing the outer door before I can remove the "sliding" door. Our outer door lifts but is still hung up on the bottom of the door. ... (cont.)

I have an old channel balance 26" 9/12" marked 2590 22 that I want to repalce. When I search your database it returns 350 (S350-26) and/or 351 (S351-26) series part. The part looks the same. I do not know the weight of the sash but assume it is 22 lbs. I will verify before I order by weighing th ... (cont.)

I need to replace an 18" long 1/2" channel balance. Your series 390 is the closest match but the balance I have has a 19-005 type top instead of the 19-002. What do you recommend?

I am looking for this particular screen door sweep. I need about 39".

Hello I have a casement window with a broken crank handle. I have included a few photos of the crank for you to see. Could you let me know where I can get a replacement?

I am trying to replace a pair of balances and need help identifying what I need. The balance is 23" long 5/8" deep and a 1/2" wide. The channel itself has a slightly curled edge as well. There are no markings anywhere on it. The sash itself weighs 20lbs. Any help would be appreciated. ... (cont.)

Hi there, My husband removed our window for the AC and lost the part that fits into the atached image. Can you please let me know what part I need? Thank you, Brigid