Viewing all customer Discussions for:

Door & Window

I am trying to figure out if your part #84-074 will work for replacing the wheel shown in the photo. We have not had any luck with securing them from the mfg, or local dealers. Ours are held in by a removable pin and the end of the wheel housing (not shown in your ad) needs to match ours for ease of ... (cont.)

glazing spline 59-068. I want to use this to hold 1/8" glass into wood framed cabinet doors. How tall is the ribbed section that fits into the kerf. What is the kerf width and depth? Can I purchase it in black? thanks, john

I am trying to locate window operators (one LH, one RH). I have included some pics. They are 9 inch. The HO has paneled the walls in the room and "picture framed" the windows, so that now the operators are semi-hidden. They have 4 mount screws into stool/sill. Any help is appreciated. ... (cont.)

I just moved into this condo and I have Acorn windows and screens. I have to replace 4 tilt window latches (2R/2L) and I have to replace 8 swivel locks for the screens. On the window frame is IGCC-362CBA-B-K Can you supply the needed parts? Thank you

I have nuair windows and channel balances #34-4 IX CMC 11 Please help ma find a part,Thanks.

I purchased your spiral balance tool (75-006) to fix some windows that wouldn't stay up. As I got into the project I found I couldn't adjust the tension and one of the balances looked as shown in the pictures below. There was a white tube that enclosed what's in the pictures. That white tube attache ... (cont.)

the 84-064 seems to have all the correct dimentions however I have metal wheels and the 84-083 does not have the correct space between holes on centewr on top. which one should I order.

I need a replacement for my window.

I have several storm door handles to replace on some senior/disabled apartment doors. Some of the folks can't push buttons or turn knobs. It looks like your product #40-028 handles will work. The question I have is: They say "inswinging doors" what does this mean? The doors all open towards you when ... (cont.)

Do you carry the Roto handle part number 0P05-1509?

I want to buy a pair of sash balances for a single hung window. I would like to buy the entire assembly rather than re-build from parts. The original is manufactured by BSI and the part number is 2830. (there is also an "NE" stamped by the "BSI"). The metal channel length is 29" long. Our home ... (cont.)

The 40-165 worked great in my storm door. If it wasn't for your company I would have been forced into buying a new storm door. Trust me when I say, that finding a 2-8/6-0 storm door isn't easy or affordable. Thank you again for solving a difficult problem, Tim

I HAVE A 22 INCH BALANCE MARKED( 21 2 FP CALDWELL) I BELIEVE IT MAY BE A S351-22 OR MAYBE A S800-22, BUT U TELL ME. PLEASE HELP!

the anderson rollers you have on your site, do they replace ALL anderson sliding patio doors ? Also, I would like to replace the weather stripping/gaskets. The door was installed in 1985 and is vinyl coated on both sides.

dear sirs, i have a broken sash counter balance that needs replaced. the anderson window # is 2860TD. the # on the counter balance is E50 9#31 2 83. if you can cross reference this to your company i would like to purchase a couple. thank you david p.

Looking for the attached, do you have in sock, if so how much?

I have casement windows throughout my house. All but two are 32 years old and work fine. Two were installed when I did a remodel using Anderson Perma-Shield. Neither has been used much - easily fewer than 100 operations, but both operators broke for the same reason. The Anderson design uses ... (cont.)

I need about 75 plunger pins for L-P window screens The ones I am replacing have white caps. Can you tell me which pins I would need & can I get white caps. Thank You

i need the inside handle replaCEMENT THE SPRING IS BROKEN AND WONT LATCH PROPERLY

Let me know if I am ordering the correct Storm Door Hinge Pin Repair Kit, Product Code 40-165 for 5 storm door (no brand name) hinges about 2 5/8". Provided 5 pictures of door hingle aspects and what remains there were found of the plastic pins( there were no springs). I don't know how the door st ... (cont.)