Viewing all customer Discussions for:

Door & Window

39-114L is a standard handle that will work and the 39-205, folding handle, will work.

i have a 1/2 x 30" channel with markings 2920 j2.. i am having a hard time identifying the top and shoe as they are broken..can i take some pictures with measurements and email them to you to help with id ?

I have a CDC awning window operator and have not found it yet even on the Internet. It's very old. The one whose dimensions appear to come close to 39-054. My CDC operator has two screws on the top and two screws in the bottom.

Is the 39-104 crank correct for Pella casement window?

I was cleaning my windows and I had a problem with one of them as it came out of the frame and I was unable to place it back into the frame completely so that it could be locked. I then removed it again and discovered that the pivot pin shoe was damaged and it wouldn't allow the sash pivot bar to ... (cont.)

Yes. First remove the window sash, then unscrew and remove the top rail of the sash. Pop off the sash release lever and the internal slide latch, spring and retainer will slip out.

What is the ID of the hole (36-018F)?

Do you have the 39-054 in bronze color?

how do you remove and install the 15-121 pivot shoe what can I use to clean window track and pivot shoe.

The constant-force coil spring that we are looking to replace has an "E" stamped on it, not a weight #. Do you know from that designation what size spring we need?

Are the 70-106 clips available(or can they be made)in a 2" length?

do i need to use two sash tension springs (20-001) one on each side of window? or will one be sufficient ?

I have the roller- looks just like the 84-101. It broke of in some ice and the pin- which was hard plastic came with it. Now this piece is broken inside the screen. How do I remove it and what do I replace it with? The other side in the screen door also broke off- a metal strip piece- how do I remo ... (cont.)

Does the metal one come in white (70-034)?

Is the 70-196 made of aluminum and is it slightly bent at the curve? Also, does it come in bronze color?

Can I buy 26-079 locally?

How do you get the balance shoe back into the channel when you are replacing a S790-24 balance?