Viewing all customer Discussions for:

Door & Window

I need balance springs and window clips

Hi, I need to know what part I need. There isn't any stamps on it or any identification writing. I need 4. The metal is 28".

So hard to tell what the brand window I have because they are so old and when I bought the house didn't think of asking. From the best I can gather this is a photo of a 2002 Rowley building products double hung window coil spring assembly. Do you have this or something that might work? 32 inch high ... (cont.)

I am looking for replacement cranks. My house was built in the mid 50s. They are stripped and won't close all the way.

For window

25.5 inch metal channel, stamp is 25 3 BSI TC, unknown manufacturer or date, bottom fitting has two rollers embedded in the plastic with a third roller embedded in the block attached to the spring. I would need 24 balances.

Hardware has TRUTH marking and appears similar to the example photo on your site. I only took an approximate measurement without taking off some trim, but I can remove the trim and get a better measurement if needed. Thank you !!

Kindly provide part number and availability for the attached part. Thanks

Repair window latch

Hello, I took some photos of the balance spring apparatus. I will need two (26-9) and six (26-3) All of them have a wheel in the shoe of the apparatus.

THE little clear plastic bracket that is holding the coil balance weight on the rightside is broken.~~~ the bracket is mounted about 1/2 way up the window (right side)~~~ I would like to order the bracket and tool needed to re-install the coil balance weightPlease help Greg

Not sure if you can help. Not clear on how to replace this on one side of my window.

Length of the metal-32 5/8" Stamp-32 6 Manuf-Milgard I need 8 balances

Looking for 12. See Photos

My sliding door states that it was made by Western Insulated Glass SGD-C30

The operating part measures 16" long.

Hi. Im looking for glazing bead from an older Siminton window. Pics are attached. Thanks

A stray bullet hit a customer's front window and broke the glass & retainer trim piece. It's the thin plastic piece that holds the double-pane window in place. It just snaps in around the perimeter exterior. I've included a photo of the profile of the piece, which is just shy of one inch wide. I ... (cont.)

Needs parts

I need the components to rebuild our screen door. Attached is a photo of a corner piece and one upper steel wheel and one lower plastic wheel. Can I source these items through your company? Let me know Thanks Eric