Viewing all customer Discussions for:

Door & Window

I need replacements for both right and left. Inside cover reads Biltbest Part 233 D.C.

Need cover and screw to keep opening the window in place

Hello, I am not sure what the part is called. It assist the window opening. It's like a coil spring on the side. Now the window is hard to open. Thanks, Chris

Hello, I need some help finding this top sash guide. I thought I found it but the one I found has a depth of 11/16 and mine has a depth of 1/2 Hope you can help me found the exact part I need. Thank you/

Hello there. So the markings on the channel balance I was able to remove isDBD032740The metal length is 28 and the depth is about 5/8" but seems to measure at 9/16"I am not sure of the bottom hook it appears to have been caught in the window.made 03/2003

I'm looking for replacement rollers for the attached photo

Rollers are 1-1/2 inches in diameter. Housing assembly is 3" long, 1-1/2" high, and 3/4" thick. Side of housing is embossed with " 041/ "

Milgard logo on crank handle. Number 31858 stamped on lower arm (not one of the arms on the "dimensions" photo, but shown on "all parts" photo and closeup. Date and time shown on underside of unit -- 08/25/00 10:28. House was built in 1952; so window has been updated since the, but before our arriv ... (cont.)

I don't see an 837 or 839 or 939 marking on the balancer still on the frame. What Swisco parts do I need to replace this pair on this window?

I'm not sure which one is correct to order for replacement. Sticker on side reads: Series: Timeline Casement AAMA / NWWDA 101 / I.S 2-97 C-C50-36x72 C-C55-30x72

I have several missing or broken pins that hold my window screens in place. They retract to insert the screen, then engage a hole in the window frame when released.

We have several to replace. We need to know the correct ones to purchase. Please and thank you in advance. Read mfg MTL9 R35.

One of my Marvin window cranks (like the one in one of the attached photograph) stopped working. It no longer pulls the window fully in nor fully pushes it out. The internal "stem" (?) of the crank doesn't grab well when I insert it and turn it. I think this "stem" might be the piece that is brok ... (cont.)

We are also needing ballast for 2 windows the number on this part is 28-30 If there is a right and left We need 2 sets Please let me know cost and availability All our windows are the Acorn Athern brand Number 2830 Window is 58 inches tall 31 and a quarter width Ballast is 29 7/8 - 30 inches ... (cont.)

Hello, cannot find this pivot bar only finding with u shape mine is a t

I don't have keys to this sliding glass door and was looking to replace the lock in order to get new keys. What parts do I need?

I don't have any part numbers that's all my guy's gave me was that picture and said we needed 2 of them.

Arm is 9.5 long. Also need the lock. Need both left and right operator and two lock s

Unable to locate new roller assemblies. Please provide part number and manufacture if you can. Also cost please. Thank you.

I need to replace Window awning dual arm operator. 22-1/8" with arms flat against the lever plate. the cross piece between the arms is 10-3/8". The Handle portion is 3-1/2"at widest then cuts back t 3" Leaving a 1 inch space for mounting to piece of the side frame of window. x 4" Deep from handl ... (cont.)