Viewing all customer Discussions for:

Door & Window

sooo I was able to take out all of coli balance parts, no weight listed. Please confirm the parts I need to order...

Hello - I would like to inquire if you have the parts shown here to replace the sash that won't rise. The springs on both sides are mangled, as shown. Is this boot the 15-177 ? The window weighs 23lbs. Thanks

these pieces are broken on our 2930 balance windows. Please let me know what we need to order! Thank you!

BMD98619 27 / LPT11 A1 is what's on the label

Our handle set appears similar to 8/21 VA post. Unfortunately our door label is badly worn: K0018 4/18/06 OC?S K VS PD Ope HS ???? CROWI ?6.375?76 4?4 Prefer replacement in white. Is this DIY? Thanks in advance.

Hello, I purchased a home with an unidentifiable glass patio door. It is quite nice but I can not find any labels or stickers to identify the manufacturer. The vinyl glazing bead is damaged on the exterior side of the door next to the handle. It looks like j-shaped vinyl glazing bead I see on this w ... (cont.)

Looking to purchase for vinyl window

Do you have a replacement for this door handle?

Bought a 82-080 - Mortise Style Handle Set, 4-15/16" based on how it looked, but was off by a little. Photos show 4 inches between the bolts that attach the handle to the door. Also attached a photo that shows my door model. Hoping the two things will help me to find the right part. ... (cont.)

Attached is the part for window I am looking for. Shoe size is 1.25" X 1.5".

I believe that 27" Series 751 Channel Balance (Product Code: S751-27) option HD is what I need. However, I'm questioning the Shoe. The stated 15-014 shoe that comes on it is a little different from mine. Please advise...

Hi, I am looking for four of these locks. When the windows were installed in our basement they did not put the lock on two of them.

Subject Pan am Window balance 1840 Swisco replacement #

Hello, How to identify coil balance for double hung windows and locks. Thank you

Vinyl framed sliding door. About 20 years old.

Screw head and bolt is gone.

Can the jamb holding a steel entry door typically lose its rigidity and cause the door to stick and sag. If so do I replace that section of jamb or is there a better solution

These are 1/2 in by 29in with a 28D number

Seven year old pella window tilt latch

I am Looking for Front Door Lock and Dead Bolt Replacement. Dose your company carry this product and what types.