Viewing all customer Discussions for:

Door & Window

Hello,I have patriot 2800 series windows. I've been told they were bought out by Plygem but are discontinued. The slot at the bottom of the channel pulls out - seems to be only a crimp fit. Bottom of the window has the metal pins to fit into that slot for tilting application. Your S795 series see ... (cont.)

I was needing to replace this broken part but I don't know what to call it. Thanks

Trying to replace a broken handle for a 16' 4 panel CGI sliding glass door

Hi there, I am looking to replace the casement operators on seven windows: two left-handed, five right-handed. I also need to replace some hinges. I have my questions organized at the end of this email.The measurements marked in the pictures are from end-to-end. I had trouble getting an exact measur ... (cont.)

I don't have record as to when I installed them, seems like it was around 1998. The glass says CTG Tempered. Does that mean anything to you? My doors are white so I want a white handle base, the handle itself can be a different color. I don't care for the legacy because it's so different fr ... (cont.)

I need a Sliding Screen Door Latch & Outside Guard

Good morning Looking to get these replacement pieces for a casement window. Top and bottom broke

Good morning I was going through the comments of your experts and I found that you can help setting up custom window balance. If possible I would like to place an order for the series 795 balances WITHOUT the t-lock spring shoe, but include the 15-198 hook. If that can be done I would like to place ... (cont.)

Hello Swisco Team, Wanted to check if you carry this size tie bar guide?

Dont see any markings.

Double hung vinyl window bottom sash coil springs broken. We need either replacement springs for two windows or a complete unit with springs and tilt assembly. I am a former general contractor with carpentry skills.

I am looking for the operator for either a 200 or 400 series casement window by Andersen from 2006 - product# 001388277 These pictures are all i have to go off of and I'm hoping you can help!

I don't want to replace everything just the door handle and lock from the inside..

Markings are 25 3BSL MF I'm guessing based on picture on your website it is series 395. Please confirm.

I'm looking for the upper and lower window hinges for an Andersen casement window. Cxw3-CXW45 is stamped on the sill hinge. The window was installed in 1995. I also need the locking mechanism for this window because the lock handle does not stay up on its own.

Hi, looking for a 12 5/8 inch track for crank window. Do you have this length?

Looking for these bushings at the bottom of the window.

Looking for a replacement sash balance. The sash balance is stamped 19 2 , but actually measures 19 and a half inches. What do you recommend? Thank youEdward

I added a hole thinking I had the correct roller but turned out to be wrong. Please advise. Minimal clearance from top to bottom and house has settled so not much room for adjustments.

I need to replace part of the cranking mechanism for the left window(looking out)