Viewing all customer Discussions for:

Closet

I'm trying to remove the mirrored doors and don't know how

Have three of these closets and they all are broken

The piece I see you have is the opposite of this one on the wheels. I have tried looking for the replacement. If you can help I would greatly appreciate it. Just Incase the pictures don't come out good the number on the part is. 3750337.

Can these tracks be trimmed? I need 59? piece so will need to cut off an inch.

Do you sell the whole kit for a bi fold door kit or just the seperate parts?

I need 2 of these rollers. Holes top to bottom 1 3/8" on center roller nylon 2 1/4" side to side 3" edge to edge across top to bottom on side 2 3/8" Do you have anything close to this I am not sure what brand the mirrored door is I do know it is over 25 years old.

Hello, would you please help me identify this part, I wasn't able to find the one with the same plastic part I will really appreciate your help

I need 3 of these handles. Thank you

I'm attaching a picture of folding closet door parts that I am in need of. In the picture I'm holding three different pins. I will number the 1-3. #1- has a white plastic cap with a spring. #2- is threaded with the insert to go in the door. #3- is just a pin with the insert to go in the door which i ... (cont.)

I see from another post that these are interchangeable. I have sliding mirrored closet doors with roller hardware that looks pretty much identical, but they are older, probably 20-25 years old. So my question is would these still fit (replacing both roller/height adjuster unit and bracket)? OR... co ... (cont.)

I recently purchased a bottom track #23-241 that I have to return because it is the wrong type. The part I need is pictured in the attachment. Can you help?

I need replacement rollers for my mirrored closet doors. Mine are similar to your 23-092 but mine are only 1/2 inch wide. do yuhave anything like that?Reggie

Hi, I am looking for an acme 4015 mirror bypass door guide. The discontinued part number is #25986 which has now been replaced by part #25170

Hi. As shown on the attached picture, I have wheel assembly similar to 23-098. However, I am not sure if inner assembly of 23-098 will slide out as mine shown which will make the replacement very simple. Thank you.

This is the bottom of a mirrored rolling door, possibly as old as the 70's. It isn't staying in anymore and the screw that goes in the top to hold it in is too big for the part itself. Any help would be greatly appreciated. Thank you!

This part is for bedroom closet glass sliding doors. Are there left and right parts or does same part work for both? Your product code 23-027 has exact same dimensions but does not appear to hold roller in tract. Is there a different part?

The casing is located in the top of the door frame..the doors have the spring loaded peg that fits into the plastic sliders. The sliders have stretched out from use and will no longer hold the pegs locked in

My closet has Har-Vey Challenger rollers with 3/4" diameter wheels and a 3/4" backset. The wheel surface is rounded. I need replacements. The only 3/4"-3/4" combo I see on Swisco has a flat wheel. ?

I believe I can use the wheel assembly in 23-098 as a replacement for the wheel in the pictured assembly. The housing on mine is different because it snaps into the door, does not screw into place, so I would just extract the wheel and slide it into my housing. (Unless you sell the wheel assembly as ... (cont.)

I need a guide for an old Monarch Sliding Mirror Door.See attached pictures.Where can I find that part?Thanks for your help