Viewing all customer Discussions for:

Closet

I also have an Alliance bifold door hardware. Did the previous writer have any success with this part?My bottom bracket is Alliance 510, and I need to replace a pair of them. I have attached pictures of a part from my good closet with a ruler to help with dimensions. Like your 23-301, my base is 1/4 ... (cont.)

Looking for replacement parts for 80" bifold metal doors

Looking for a replacement for top roller hardware. See photo please.

How do I remove my closet doors with these wheels? The bottoms ones have 4011 on them and not sure of the top. I cannot figure out how to take the doors off. Do you have a video?

This bifold door is 40+ years old. There is one of these parts on each door, only 1 broken. Can't find anything locally. Can you help? (I sent a picture previously of only half the part. Didn't realize there was another half.)

I identified and bought from Swisco the rollers to replace the ones that are not functioning properly on my mirrored closet door. I bought the 23-027 and the 23-026. I have been looking for instructions to install them. Do you have any instructions for fixing the door with these two parts? I hav ... (cont.)

Hello, we are trying to identify these parts for the top of a bifold door.

Do you have a part like this? It's for sliding mirror closet doors. Thanks David

Looking for a replacement piece like this for our bi-fold door (original from when house was built in the 60s), possible to find?

looking for a couple of parts, information that I gathered from the top pivot Guide,the spring loaded one has a pat. No. 3397790 and Pat.Can. 1970. The parts that I'm looking for are the ones on the picture d and e. or other parts that will do the same job.The one on the picture d runs free on the s ... (cont.)

I need two of the 4012 bottom assemblies and two 23-222B top assemblies.

How to install on wood sliding door.

Hi I need assistance with part U.S. Pat. 3.041.65 / CAN. 673.838 119631. I was reading your posts regarding the above part. Can you clarify which part is the best replacement? Is it 023-011 or 023-047. From what I can tell it appears to be 023-047. Thank you RG

Hi Frank. I recognize these parts from old Slimfold bi-fold doors. For a bottom threaded pivot pin, see the 21-001. For the guide pin, see our 21-007. The clamp can be replaced with our 21-154. If you need bumpers, see our 21-277. Look over all parts to confirm that they match your old components. W ... (cont.)

Hello! I have the old benchmark steel bifold closet doors. We just had our flooring replaced. Do you know of a way to hang the doors without using a bottom track? I know with some doors you a screw a pivot point into the floor and you don't need the bottom track, just not sure if you are able to do ... (cont.)

No identifing marks, codes or stampings.

Bottom rollers I think is part 23-041 Track 23-240 Top rollers nor sure at all Thanks

Do you have this item.

Hello Swisco I'm helping a French neighbour find replacement rollers for a fitted wardrobe. There are no markings on the roolers. I've included a tape in the photosfor sizes. The roller is fitted into a recess so that the back of the caster is the only part on view.

Hi As you can see from the pictures i need help identifying this closet door roller wheels. There doesn't seem to be any kind of screws that go on the mirror closet door. Can you let me know what part i need for this. Thanks