Viewing all customer Discussions for:

Closet

I need new 2 top and 2 bottom pivot brackets for my doors. I also need 2 top and 2 bottom pivot pins that will fit the brackets. I prefer not to remove the track but can if necessary. No manufacturer but cardboard glued to inside bottom of doors and one caution arrow. Please advise. Thanks ... (cont.)

Hi! I'd like built wardrobe in my garage. Only instead of glass, I want to use MDF 4 mm. What do I need to buy? What are the top and bottom guides? What are the top and bottom rollers? What handles? Help me please!

stanley/monarch mirrored unit 60"Lx3.75"w acurved front fascia

The part captured in the picture above seems to be broken. The brand is Stanley and the number on it is 4050. I have tried to find it at Home Depot or Lowes but have not been successful. Do you have it?

I purchased a home and two closets have mirror sliding doors. Apparently some of the rollers were replaced with convex wheels and the doors easily come off the guides. I found one wheel tat apparently is the original wheel and fits perfectly in the groove and it is a flat and solid nylon wheel. (Ple ... (cont.)

Monarch lower track similar to deisel 23-271 59" lower track swiscoMonarch Chatsworth California project 835?49. 835051c #1983. con report3220

Hi, I am trying to refurbish two sliding mirrored Stanley closet doors. The lower roller assemblies have a number 17-4264Y-000 on them, I would need 4 of these. The upper roller assemblies have a number 00-5024 on them, I would need 4 of these. Do you have them or a replacement for them. Thanks, Jim ... (cont.)

I need the adjusting pin (shown in picture) And the spring and plastic retaining clip (pencil pointing to missing retaining clip) in the second picture.

The door pin cap is broken, and the only parts I have are thebroken cap and the spring. I also need help in installing parts into an existing door.

Please see the below attached photo of the bottom guide on my bypass mirrored closet door.The guide is broken and I need to replace it. Can you please give me the part number and where I can obtain it? Thank you in advance for your prompt attention. Bottom guide on my bypass mirrored closet door- ... (cont.)

Do you have this item or anything similar with a 1/2" or 3/8" roller?

Can you identify for replacement?

DSH 20121 on both parts3870 is a pic of the original parts to a mirrored sliding door. I ordered 23-026 & 23-027, but in pic 3925 & 3926 you can see that the tab that hooks in the top and bottom of the door is out 1/2" original is 1/16.Can you help me to identify the original pieces so I can ... (cont.)

house built in 1990s. wheel diameter is 3/4". rail width is 3/4".

I need replacement bi fold brackets. I have mirror doors with a independent mirror industries Inc sticker. I am trying to rehang the doors but there seems no way to attach them.

Please help..my doors will not stay closed

I need this part for my closet

23-222B OR 23-222C, WHICH IS THE REPLACEMENT FOR STANLEY 00-5024?

Put down new flooring, the bottom track for the 6' Closet was misplaced when they took it out. I looked on your website and ordered two (23-509) but when I just got them - I wished I posted pictures first (obvious not the correct part). This part seemed like it is for a smaller door and for the to ... (cont.)

Is this part available? The part is off of a metal bifold door. It is designed to fit into a 1/2 inch square hole and accomodate a 1/4 inch pin. The screw is used to secure the pin at the proper height.