Viewing all customer Discussions for:

Closet

I want to replace the existing closet door track and your 72" Sliding Mirror Door Bottom Track Product Code: 23-242 looks like the correct replacement part. Three questions: #1 two of my openings are smaller than 72", can you cut them to order? #2 one of my openings is 132", is it best ... (cont.)

I am in need of a track for a metal bi-fold closet door. 4 foot opening. All I see in you parts list is the track for the 3 and 6 foot openings. Is it possible to cut the 6 foot track (21-403) or am I missing the part number foot the 4 foot track?

Looking for 10 bottom rollers shown in attached picture. No identification of manufacturer, code numbers on doors or hardware. They are mirrored sliding bypass doors. DIMS: LENGTH: 1-19/32" WIDTH: 1/2" HEIGHT: 2-3/8" (METAL ONLY, DOES NOT INCLUDE ROLLER DIMS) ROLLER DIAMETER: 1-1/2" If ... (cont.)

We have a condo that was built around 1985. Our kids have lived there while attending school but when the last one moved we discovered that one closet door is missing both of the overhead rollers. The guides at the bottom are still there. The closet doors are the by-pass type and cover one wall. ... (cont.)

I have 3 standard hollow core closet hanging from 2 overhead tracks to conceal a storage area. I need something to keep the bottoms aligned. Your mirrored door tracks look like what I need but I would like some more information on your 23-215 guide assembly, perhaps installation instructions if av ... (cont.)

I have metal folding doors with no manufactures name on them. I believe they are original to the home built in the 70's. They all work fine but the plastic caps on the track guides are wearing out and i am getting a lot of metal on metal. attached is the piece i would like to buy a dozen of. If i m ... (cont.)

How to remove broken handle (appears a exact match) and install new 10-010 on mirrored closet door in my Newmar motor coach. Thanks JMichael

I currently have a track that needs to be replaced but it looks like it has been discontinued. I have included a picture of the track and wheels. Is it recommended to purchase a new track and coordinating wheels? Or would my wheels fit with your track?

I am trying to find out if the bifold pivot on the bottom of the Full - Vu door requires a spring to push up or push down the pin that attaches to the bifold door pin cap. Where are are 21-049, 21-050 and 21-058 used, for the top or bottom of door ?? The pin that is there now thou badly ru ... (cont.)

Who makes these and where can I obtain then for replacement?

I have an Ace sliding door roller that I need to replace. It looks and measures exactly like the 23-043 but the flare is only about 5/8" wide. Would the 23-043 work?

this roller assembly on the sliding mirror is attached without any screws. Do you have any that can be attached without screws ?? if so what is part number need to see a picture. 23-041 is not exactly the same as i have on the mirror sliding door.

I am replacing the flooring in my home and am looking to replace the floor track for my mirror closet doors.I have attached a photo of the existing track. do you have anything similar to this?

Good afternoon, I am a multi-family facility owner and have a 200-unit complex built in 1978 using Benchmark, steel, bifold closet doors. We have found the replacement pins for our normal supplier, but have not yet been able to find the track. It appears they used 36" tracks with a connector on a ... (cont.)

Thanks for posting. This looks very similar to our 23-161 4-wheel pocket door carrier. Please take a look and compare its dimensions to your own hardware. Do you think this would act as a replacement?

I recently purchased your part 23-242 bottom track. I have concave wheels and the track calls for convex. Pictures are attached of my current ones. Any suggestions? Than you.

Hello, I am having trouble trying to locate the correct hardware for my metal mirrored closet door. Attached are a couple pictures of the hardware, the wheel diameter is 1-1/4". Any help would be greatly appreciated. Thank you, Richard

Would you please help me identify if your company offers the roller replacement I need to repair my mirror closet doors? I have attached 4 photos of the roller I need. The roller has the number 4012 stamped on the inside of it. Thank you Albert

Do you have this pocket door flush pull in Chrome or nickle? Product Code: 22-027

I have a closet doors manufactured by Monarch Mirror Dor Co., Chatsworth, CA. I am in need of a bottom track that is 6 feet long and can't locate it. Any ideas? Thanks