Viewing all customer Discussions for:

Drawer & Cabinet

I need several shelf supports that look like your number 32, but mine has a 34 on it. It is 2 1/2 in. Long, 3/4 in wide. I have sent a picture of the front and one of the back.

Hello, I am trying to find some replacement rollers for 2 credenzas in my office. Your website has the closest thing I have seen. Can you help? Cole

I need help locating a product like this. It can be slightly smaller. Do you carry anything like this? Thank you for your help, Barbara

Please help me find this Hinge in brush nickel.. I have brass right now and I'm looking to replace 30 in brush nickel.

Seems like all our almost-30-year old rear drawer slider sockets have decided to start crumbling this year. The sliders are all fine, I just need several pairs of those sockets, and googling is pretty confusing. No one has them in stock and they all appear the same but I won

I need hing replacement for this assembly-they won't close completely,even after adjustment

Doing some over due kitchen renovations and need 8 of theses items. Thank you Keith

Hello ,! I am thinking about installing your sliders 32-223 on IKEA drawer , which has groove 1" wide instead of 11/16" of slider 32-223(Slider thickness is the same 3/8"). Will the gaps in a groove on both slider sides effect sturdiness of drawer mount and a way drawer goes in and out? Thank y ... (cont.)

Having trouble locating these drawer slide backplates. I

Top drawer roller one is missing on opposite side

Hi, I am in search of small plastic drawer guides for a metal cabinet that is military surplus. I have no manufacture or model number. The drawers are sheet metal. Rails for drawers are part of the drawer structure itself. The cabinet rails are part of cabinet structure itself as well. Guides are "L ... (cont.)

Can you help find a suitable replacement for the two part bracket shown? The drawer slide is has a 'G*' stamped into the metal. No other marking is available. The cabinets were installed in the late 1989's or early 1990's. This is the second set to break and I'd like a solution that doesn't require ... (cont.)

I have a drawer that has unigrass 6000 slider bars. Two of the drawers because of over weight have damaged plastic rollers. I'm looking for replacement rollers or complete rail. The actual rail w/roller is 21 5/8" long. Thank You, Patrick

Size appears to be 7/8 x 1/4 and appears to be pressed in. Need 4

Do you have a replacement set (2) for these. Note the rear "male fitting" that connects into the support plate in the back of the cabinet. Much thanks,

My cabinets are 30 years old and it looks like my assembly was glued on. Pus the 32-012 looks a little different - shorter than the 2.5 inches in your picture. Do you think this will work for me and will I have to glue them on?

I need to replace kitchen cabinet drawer slides for 2 large drawers that have a built in lip on the drawer sides. The existing slides mounted to the inside of the cabinet are 19 5/8" in length, but are only 1 5/16" wide at the end with the wheel.The projection of this end is 1/2", but the wheel is b ... (cont.)

Looking for part see attached photo. This is from an old cardell cabinet.

The rear adapter bracket I have broke. I cannot find a replacement in the size I need. The part number of the broken one is 6600. The size I have is one inch by a quarter inch. Everything I have found is just a little to small. The wheel on the side of my drawer will not fit into the smaller one. Th ... (cont.)

Need a new rear mounting bracket For a self closing drawer in a cabinet. The mounting bracket is slightly upright To fit the slide which is bent down into the bracket... this allows the drawer to self close ..