Viewing all customer Discussions for:

Drawer & Cabinet

The picture shows a complete unbroken hinge and the broken door side hinge. The door side of the hinge number is 510.353/ 10.00. The mounting holes are 48 or 49 mm apart.The cup is 35 mm. The face frame mount number is 348.253/ 51.02 The overhang for the door is 0.5 inches.

Read through this discussion about removing drawers on the Kenlin Rite-Trak drawer system. We currently only carry the Kenlin Rite-Trak I system. The Rite-Trak II system is not available. The Kenlin Rite-Trak I system features the 32-076 case runner and either the 32-081 guide or the 32-082 heavy-du ... (cont.)

Need to replace one (1 side) 22" Accuride kitchen drawer slide as shown in photos. Installed new 24 years ago.

I need to find a bracket as the old one is broken.. can you assist/

Hi, these glides were originally white plastic and form around metal like a boxy horseshoe (?) or squared C shape. Any idea if you sell a suitable replacement based upon past inquiries? Also hinges, and I've heard the pinball type metal Pin that goes into a metal grabber mechanism is no long ... (cont.)

I was inquiring to see if you have this particular hardware item on your website that I have displayed in the picture that I have attached to this discussion. If so could you kindly guide me to the appropriate location on your site where I may begin the ordering and purchasing process. Any help ... (cont.)

Please review the attached photos and please advise me on the proper procedures in rectifying this drawer socket. Thank you in advance for your time and patience

need 7 of these metal pieces that the drawers rest on one on the left and one on the right side on the bottom of the opening.

How does one fasten these glides? And are the ones with the nail embedded into it better?

One of your I items looks close. Is there any way to find out? I can't find any reference #.

Looking for center roller for silverware draw front of draw is wood rest of draw is a single piece of plastic

The plastic piece at the end of the runner is broken and the company no longer makes these pieces. I have included pictures of the broken piece and the label from the back of the dresser.

Where to locate replacement 1962 kitchen drawer etc

The drawer slide won't stay in because the socket is broken

I just received my 20" 32-060 self-closing drawer slides and am wondering if there is a template or measurement instructions for mounting them both on the drawer itself and on the inside walls. Or do they just go exactly in the middle of the drawer side and matching position on the wall. ... (cont.)

FGV made in Italy hinges. Mostly I need the 2 screws for That connect the two parts of the hinges.

Child craft by smith dresser. This is the piece of plastic that holds the drawer in and keeps it from falling out when open. I need some new ones please as I have two of these dressers and many have this piece broken

Lane Furniture Armoire 316 224-12 Serial 3396140 Need 4 hinges for doors

I am looking for the brackets that go in the back of the dresser drawers They are brown in color, square in shape and have a metal covering. The dresser drawer slides onto them as you reinstall the drawer and they slide along the metal track. I have purchased them from you in the past and hope that ... (cont.)

Can you suggest a method to replace these roller mechanisms with drawer slides in my hand-made 1980's kitchen cabinet drawers? I'm thinking the set-in wooden support rail might be hard to remove. Thanks! Claudia