Viewing all customer Discussions for:

Drawer & Cabinet

I am interested in part 32-038, 32-040 and / or 32-041. My problem is I need a wheel that is 3/16 to 1/2" in diameter. I am only looking for 5 pair. Can you help me? Craig

It is plastic 3 7/8 in length & 1 1/4 width. I need a total of 8 or something similar. Herbert

Hi I am looking for a replacement rear drawer guide for a Bassett kitchen island drawer. The piece itself is 2.5" long.

I am trying to find this part to repair my drawer, there are no numbers on the part, but the part is 4 1/4 in. long.

mounts to back wall of drawer ,,holds the slider rod.

This is a drawer slide. Located on the back of my kitchen drawer. Pat no 288723 (i think). Is white plastic. I only have broken ones

Your pics detail the height and width of your drawer slides, but not the actual length. i.e...is a 24" drawer slide truly 24" or 23 1/2"? I have a replacement project that measures 23 1/2" from back of cabinet to front of cabinet face. The nearest drawer slide you have is 22". The replacement does r ... (cont.)

32-334 is very close but i need a 1" deep space not 1 1/4". They photo attached is the one that broke.

Is there a left hand & right with this roller or are they interchangeable?

I have a plastic drawer slide which identifies as the following: R FISS MFG Corp NNC PAT: 2855260 PAT: 2857233 DO have this part? Thank you very much

what are the dimensions of and differences between the 32-089 and 32-018? Thanks

No names, numbers or markings found. Need replacement part for drawer socket shown in second photo with measurements. First photo shows intact slide & socket.

I need 2 pair of these drawer guides

I have included pics, with measurements etc on on the attached document. The stamps on the socket are G 6600. There is a C stamped on the corner. There is an L stamped on it, I assume that is for left as it came off the left side.

Hi. Totally not using technical terms here, but I need four of these bad boys for a 1970's modular home were remodeling. Two drawers cannot be reinstalled because we're missing two of these. My hubby would rather nail the drawer fronts on and call it a day. I have faith we can keep these drawers ... (cont.)

I need to replace some of your rear glides that are quite old. The number on them is R-26 and patent number 2857233. Can you please identify the correct item. photo attached

from the square end to the large round end is less the one inch the rectanle that both the large round end and small pin like post is 3/4 of an inch. Sorry the last picture is very out of focus. Thanks for your help Roy

I am considering using this track to replace wooden tracks in my daughter's vintage furniture. It says 22" and her tracks are 16". Can they be modified, if so, how do you recommend doing so? Thank you, Terry

I just received my order. It was earlier than expected! So happy I found your site on line. My furniture dealer couldn't send me replacement parts and my local hardware store didn't have what I needed. These sockets and runners were perfect! I will definitely order from you again and I will tel ... (cont.)

What type of stopper would work with this drawer from an inexpensive roll top desk? I can not tell how 32-125 drawer stopper works.