Viewing all customer Discussions for:

Other

I have attached pictures of an intact tilt latch and the broken ones. I unfortunately am not present to measure hole distance width or total length. Can you pinpoint what I need? I believe the wood in one of the Pictures can provide some scale. Thank you

I need 4. See attached photos. 1/2 inch channel overall length is 31 1/16 tip to tip of the plastic ends. Stamped "s 2910"

Hi. I need a replacement part for the roller on the bottom of this glass sliding door. It no longer rolls on the track. The model of the door says "Stanley MOD. 781". I don't need the door. I only need the roller on the bottom.

Hello, we are looking for this Marvin Awning Operator, the arm length is 9-1/2" and it has a pivot shoe on the end that connects to a rail on the bottom of the sash. Please let us know if you have this. Along with the crank handle. Thank you.

Can you identify which balance I should order to replace this part? I will need 6 of them for 3 windows that are struggling to open up. Thank you very much!

Need several sets. Originals deteriorated from sun exposure. No company name or identifying marks found on latch or windows. Windows installed approximately 2006.

These came out of Eurocraft windows.

Top latch is broken needing replaced

have a sunset shaped window that is 58" wide and 10" tall at the center looking for vinyl trim that holds the thermal glass in place no name on the window but i know it was made in 1988 when the house was built. White in color and I measured it at 3/8" on the face and 1/4" on the part that goes into ... (cont.)

I could use some help. I have a couple of crefree windows from a modular home probably 20yrs. old that the balancer is just a spring . like you would see on a old screen door.That hooks to the pivot shoe.

These are the pictures I took of the part number and parts of the existing balancer.

Need to replace the attached sliding door handle and lock. Where can I get it?

Hi,I need to purchase Pivot Bar Sets and pivot shoes for an older thermal guard window.please provide the replacement or compatible parts number based on the attached pics. thanks,Rafael

I have 3 windows I am repairing. They are all the same make and installed the same year. first window needs a balance shoe and a plastic left side latch to secure the window into the frame. 2nd window needs the entire channel balance mechanism that is ~21 inches 3rd window needs entire chann ... (cont.)

I am unable to locate a part number for the attached photo. I am hoping you can help. Thank you, Don

Do you happen to have this counterbalance window part? Thanks. Regards, Trien

Hello, I need help identifying this balance. I believe its 1/2" x 28 channel. Not sue on the LBS. But I need 4 of them complete with the ends. Thank you. show 7/8" plus for the depth. Attached is a few more photos. The over all length from end to end . It's 29 1/16

New window locks needed for 1985 building in Nashville

I am looking to order (4) of these balances with the 15-230 shoe attached. Please let me know if you will need any other information from me.

Left Latch Pat#5,139,921 9F on back of latch .092 on clip that holds latch in place Right Latch Pat#5,139,291 7E on back of Latch