Viewing all customer Discussions for:

Other

Hi , I'm looking to find replacement screen corners like the ones in the picture. They have little tabs that you can flip out to hold the screen in place and flip in to remove the screen. The screen is mounted inside the house, do you have anything that might replace these? Thanks! ... (cont.)

These are 21 inches and I would need to if you could let me know if you have them and quote me the price!measurements for shoes15/161 1/161/2Thank you,Jon

Inside the picture of the old lock, where there are some circles, on the right side is the #2 & on the left side are the following: 1 2 3 4 5 6 7 8 9 X Y Z The dimensions are as follows: Outside egg shaped handle: 6 inches Inside handle (White) 4 3/8 inches There are 5 holes on the door frame it ... (cont.)

I have an house that at some point added storm/screen inserts that were manufactured by Mon-Ray out of Hopkins, MN. They work well but I have some were the locking/sliding mechanism (uses a peg that slides) have failed and so the storm can not be raised. My handyman suggested that you may have rep ... (cont.)

I have 7 windows with dual strips approximately 2 feet tall and they are passing wind thru in the winter. Theyre marked LP in the corner of the glass, i dont know if thats a brand. Ive included some photos to see if you can help me buy the right weather stripping.

Please look into this part and send me the part no. w=1.25 l=1-7/8' and thickness= 1/2"

Hello, I hope you can see the picture good enough. We need 2 of these. Please contact me as to how to pay, It says truth 9ddoop on this unit. thanks Dennis

Hello. Please lead me to this crank out operators. Thank you.

Hi, You guys are awesome. I order all of the time. Could you please help me identify this Anderson balance? Thank you.

Single hung tilt latches.Top plate 2-3/8" long

Please help me replace my balancers for milgard 2'x3' bathroom window. Length of metal chanel = 13.75" Stamp # 13 2 I need 2 balancers

Looking for covers and cranks for this window. Can't find any part numbers on it but the brand is Truth and pat. No. 4,840,075. Made in USA. Prefer a foldable crank.

Looking for Vetter slider weatherstripping around the door jam inside. 2-79 1/2 inches for the side and 2-69 inches for the top.

42 1/4 length locking bar and the lever is 3 5/16 long X 11/16 wide

I am looking for the vinyl window part shown in the attached pictures. The only markings I see is the letter "E". Thank you.

Hello- Please help! Home built in 1961. 4-200-RH only identifier.

No markings. No manufacturer of the hardware or the door system

This piece has no number on it or description

The lock on my casement window broke.In the process of opening the window which was locked shut, the rubber weather stripping was damage and needs to be replaced, but I am not sure what to order. The lock replacement I am ordering is 38-095 Maximum multi-point lock with medium slider. Looks and meas ... (cont.)

Please refer to scanned drawing No markings on existing whatsoever