Viewing all customer Discussions for:

Other

I'm looking for this problem child, on a aluminum sliding door, probably from the 80s-90s, its half way working until the upper screw pulls through the plastic, and its in a weekend rental, so im hesitant to dismantle and break it completely, any info would be awesome and appreciated, I can take mor ... (cont.)

I am restoring 2 casement windows. Crank assembly to open windows need replacing for windows need replacing

I'm looking for a double lock striker plate, it's coming off of the 5800 Silver line patio door again I'm looking for the striker plate, I do have the locking mechanism, in addition, Where the striker plate is missing, there are four holes the furthest hole is about 9 1/2 inches apart, The two that ... (cont.)

No additional part number visible.

Hello ? I have identified replacement housings (15-086) by dimensions and appearance, and the coils by rating and dimensions (S180-6, S180-7) but cannot find a match for the pivot housing. Please see the attached photos. Will the 15-087 replace both the lower tandem housing and the pivot housing, or ... (cont.)

Bought a condo and the handle to the sliding glass door is almost broken. I need to know if you still have this model available.

My visible glass size of the sash is 28.25× 34 It's a double hung window with the marking stamp 11600-17 Could you check the correct balance unit ?

I've got an Anlin Satalina SH H-R20-48-96 AAMA/NWWDA 101/I.S. 2-97 window. I've identified the 6/5 Coil mechanism from another post https://www.swisco.com/discussions/Need-to-know-the-spring-coil-part-number-dual-style-77-141220, but I can't find the appropriate sash pivot bar. It measures 2 7/8 an ... (cont.)

Need replacement for: Stanley patent number 375C337

I have multiple hinges wearing out. Here is the imprint (see photo attached). Please advise on suitable replacements. Thanks

Can't find a correct door handle for my door. It's loose and not holding to the door.

Has Pat 1967 Can also with a B on one side. On inside of hinge is a 6 or 9.

L30841 on crank. 40242 on latch.

Weather Shield Window - Single Hung - Need replacement channel balance. Channel balance - number on part - DB-L02 21 REG and DB-L02 30 REG DB-L02 21 channel measures 22" DB-L02 30 channel measure 31" Width is 1/2" and depth is 5/8" See attached photos of channel balance installed and removed. Win ... (cont.)

I need enough material to reglaze two 54"x20" panel casement swing out windows. The house is 25 years old. The profile is attached with marked measurement of 1/4" by 1/2". Color is light grey but crème or white will work.

Hello - I am trying to identify new rollers for my sliding patio door. I don't see any markings on the wheels and I can't find the manufacturer of the door

I'm looking to purchase upper and lower replacement PGT Window SH700 Lift Rail End Caps

Hi, I have a broken channel balance that i want to replace, here are some pictures of the defective balance along with stamped numbers. The plastic inserts are still in the window side and in good shape. 21 in length 1/2 in width l Thanks

We just moved into a new home with Pella casement windows from the 1990s.The roto operator has a finger and a catch that are worn out and the windows don't close well when almost closed - because the finger slips off the catch. I'm looking for replacement mechanisms or alternate replacement parts. ... (cont.)

This window is above the bathtub in the master bath. Unlike regular windows that swings left/right, this window goes down( closed position) and as you crank the handle it opens up. The crank handle has name "SealRite" written on it. Looking to replace this crank since does not work. One of the contr ... (cont.)