Viewing all customer Discussions for:

Other

Dear there, I looked at your website, and found my window looks like casement window. Currently my window opener is broken (I can open the window, but cannot close it, the handle will be off when I close it. See the attached pictures. Could you please which parts I need to buy? Thanks a lot! Jon ... (cont.)

Looking for these parts to our Alliance windows.

Window # 60992 JMH residential The whole left side of window needs to be replaced

I need a #7 coil shoe for this window. The color is blue. Please advise. thank you in advance.julie

Recently servicing our rental and tenant reported the window mechanism had come off. On inspection the ends are sheared. Is there a replacement available? The pivot handle is working and the window opens freely

Channel length is 19.5'' (not including top/shoe), width 0.5'' Stamp printed is "19 6 B.S.I VP" Window is Alpine Windows. Installed in 2005 4 balances will be needed for 2 windows 0.5 x 19.5''

Do you have a replacement for this 27 inches long with an 1 1/4 shoe

Need replacement Andersen sash balances. Confused on which number to look up. I attached a close up of the numbers. Also, are these the same left and right?

Hi, This is my roller assembly / I got the photo off one of your videos. I need a part no. for a 1-1/4 inch stainless steel wheel. Also need a part no. for a stepped axle to fit the stainless steel wheel you recommend. I would prefer if the stepped axle were stainless steel also, but I can live with ... (cont.)

The plastic tab in the sliding door guide broke off. Can you identify the replacement part for this guide? Thank you

I recently ordered replacement parts for my Patriot Casement windows under order for 39-187 & 39-188. These were the closest matches to the existing crank show in picture above.The new parts do not match the existing. do you have anything like my existing cranks.Paul

Do you have replacement for handle/lock pictured? Looks like Flush Mount Patio Door Handle Set, 6-3/8" Product Code: 82-076 might work but would like to be certain. Would have to be installed upside down. Would that be doable? Ours only shows patent number 3216229. Original to our home built in ... (cont.)

Looking for the part

Need new lift mechanism on side of several windows single hung windows tilt in

UNITEX ANSI Z97.1-1984 16 CFR 1201 11 SGCC-2573 5/32 U 2 Bottom pieces that guide sliding shower door

Could you identify this operator? The handle says "Hurd" and the arm says "Truth". I couldn't find any numbers. Thanks in advance. Debbie

I do not know the proper names for this hardware, I am hoping you can identify them. Thank you, Tyler

This came from an old 1970s VinylLine window. Tube is 25" with red tip. I think the S600-25 look like a fit but not sure.

What parts do I need to fix this?

Can you determine from the attached images the correct parts that I need to replace both pivot shoes and coil springs. There is also a small part that is screwed into the channel (image attached) that I assume I need to replace also. There are no slots on the sash channel to remove the pivot shoe. ... (cont.)