Viewing all customer Discussions for:

Other

I'm looking for 1) LH and RH plastic window screen corners that fit Crestline Window screens and 2) pull rings with screen groves for the same screens. Thanks!

Hello,We recently went through a remodel. We are missing several window cranks. We would ideally like to move to folding window cranks - away from the ones currently installed. Do you have a part that would accommodate this? Thank you!Lindsey

I need a new handle for a patio door. I thought the door was an Andersen, but the glass in the corner reads "ppg herculite". I need only the handle but I have shown the separate lock in case I need to get a different color handle and need a matching lock. The space between the screws fastening the h ... (cont.)

I am looking for these pins that engage into the plastic piece at the bottom of the spiral balancer. I would also like replacement weatherstripping for the bottom of the moveable window if you have that. Inside of the pane says Dorco 95. Thanks.

The measurements are .47 thick. .97 width. 2.01 length. I incorrectly ordered 15-045 and it did not work for me. Please help.

Sash is shifting to one side allowing the shoe to snap up between the sash & frame while the shoe on the other side gets pinned below the sash against the frame. The sash width is 45-5/8" while the frame opening is 46-5/8" wide. With 1/2" of open space on both sides I can't see how this style of s ... (cont.)

I need two of these but need help finding them please; otherwise, advise is appreciated. Thanks so much.

The length of the spiral portion of the balance is 30". The spring appears to be the same. I don't know how we were able to get this out of the sash. Others were not readily popping out. It seems the failure is caused when the window is opened too quickly, forcing the spring to deviate and break fre ... (cont.)

The one pictured in the window is the right hand one, but I need the left hand one because it snapped (see other picture). Also, do you know how to remove it? Thanks!

I'm having a hard time finding a match for two rollers: Roller stamped A-S NYC 7867 3 5/8" long 1 3/8" tall 3/4" wide The roller is stuck inside, but the OD is appears to be 1 1/4" The brass roller has no stamps 2 1/2" long 1 1/4" tall A little over 5/8" wide OD wheel 1 1/4" Additionally, I canno ... (cont.)

Looking to replace a atrium door weather strip

This is the top bracket for a casement that cranks open from left to right. I used part 39-216 to replace the bottom bracket once on this window.

I have 30 yr old Marvin windowsThe Balancers are broken, the cord is goneMarkings on the side of the lower window are40X2485 2025Forgeon the metal rail on the balancer it saysAC 24 HD TSE

Hi! Wanted to confirm which part I need to buy to swap out the existing Truth branded crank for one that folds in. Would this part: Truth Folding Crank Handle, 11/32" Product Code: 39-205 be the right replacement? Or is there something else you'd suggest? Thank you!

the cover and handle is damaged and needs to be replaced. Looking at cover installed the crank opening on the cover is on the left end.

Hello, We have a house built in 93 using Truth hardware for our casement windows. Many have stripped handles, and others need the entire setup replaced. Any chance you can ID this without me removing it? My husband is about to be out of town and I'm trying to get some repairs planning done without ... (cont.)

Looking for this part. When you lift the lock arm, this rotates the lock and grabs the slots in the casement sash

Need right side latch on bottom panel of double hung Millco window

I need balances for the left side of a top and a bottom of a wood window. The bottom part is black but it's more of a U-shape than what you show on your website, which looks more like a L-shape. I need a 38-inch balance and a 36-inch balance

My sliding door handle broke in the locked position - can't open the slider. I probably need a whole new unit. From your previous post - I think it's a 82-080. Can you itemize what I need to buy besides the handle? Thank you!