Viewing all customer Discussions for:

Other

Hi. I'm trying to replace the slide bolts on a storm window. Would you happen to have replacement for the parts that I've uploaded? Thank you.Michael

Milgard slider roller(s) needed to replace a lost roller and several damaged. Windows purchased and installed ~ 20 yrs ago. Dimensions L = ~1-3/16, W=5/8", D=3/8"

Hello, I need help identifying which hinge I need to replace these. I need one right hand set and 5 left hand. I see that it says andersen, maybe you can decipher the part number

Pivot bar it says 14110 and one box and the other box has a capital L Thank you in advance

is there a parts list for mi windows

I'm looking for 2 sets of these springs as shown in the photo. That's 2 LH, and 2RH that are needed . Each is marked with an 8. They were the original units.A photo of the i.d. label also appears.Thanks in advance, Andrew

Unfortunately, I can't find any information on these windows. There are no stickers or stamped in information on the window or frame that I can see. The part on the zoomed in photo has part of the U shaped bracket missing. The picture with the part with the screw at the bottom of the window is miss ... (cont.)

Hello there,I need to replace this glazing bead, I hope you have something similar o same.Please let me know if you have this.Thank you.Pedro WCI

I need some plugs for the window grams bugs keep on getting in through them

I need a quote for 12 channels. They are Series 795 26C with a 15-198 hook. They need the 1" T-Lock balance shoe - closed cam. Part number is 15-194. I ordered 10 last year and they worked great. Want to finish the remaining windows. Thanks.

Hello, I'm curious if you have any slide bolts to match the ones on my Larson storm windows. I have attached a photo. Thank you for any and all assistance, Maegan

Window handle that winds to open and close window

I'm not a great measurer..... I think ( minus the spring ) - its 1 1/2" long... The plunger is 5/16" and the 'tip' is 1/4" ? Please let me know your guess & I'll order. I do know about drilling larger holes if necessary. ( and I have fixed other parts on the window ( ie: T-Lock shoe/springs ) ... (cont.)

Need to replace a sliding glass door lock and or handle. It locks with key from outside but inside lock broke off. I will send pictures and what sticker says.

I need replacements for these parts for both, left and right, of my garden windows. Do you have some parts that may work?

Measurements 3 1/4" L and NOT INCLUDING THE LOCKING PROTRUDING OART 1 1/4"wide Scew holes (2) are set 2 1/2" apart -center to center As Can see from the pic the screw hole WHIXH Doesnt house the protruding locking part sits very close to end of the part The 2nd screw hole sits on. Enter ... (cont.)

Hello, I took out one of my awning windows to put in an ac unit, and a tiny piece of hardware slid out of the side. Whatever the piece is, it keeps the arms of the window attached to the bottom. Without it, the window falls and hands by the arms on the sides. What the heck is the part? Thank you! ... (cont.)

The spiral piece that engages the gears opens windows but when closing it it just "unscrews" from the mechanism and detaches. It's on an entrygard by truth. Probably older(just bought the home)

The spiral balance tube is 27 inches long and 3/8 of an inch in diameter, The problem I'm having is with this small foot on the bottom of the spiral balance which measures 2 1/2 inches approximately. Most of the other spiral balances don't have this food that's attached with a rivet ... (cont.)

need 2 balances to replace old ones. Numbers stamped show 29-4. See attached photo. thirty inches long, metal to metal