Viewing all customer Discussions for:

Other

Hi. We need 3" pívot bar replacements for a vinyl window (company Accent Windows, Denver, CO?not in business anymore). The holes are at 1 11/16" and 2 1/2". I hope the attached photos show enough of what you need to see. Thank you for your help.

Where do I buy replacement parts for a prism brand window. I have a double hung window and the top window does not stay up. The side plastic brackets are broke

Trying to find these screen clips. No markings or numbers that we can find.

replacing weatherstrip in caradco double hung windows 1992 vintage my measurements show 5/16 inch bubble and approxiamtely 1/4 inch kerf

Hello I'm looking for a new mortise and lock cylinder for my Phillips 870 patio sliding door. Can someone please help me. I'm also looking for the same Phillips 870 screen door lock assembly.

length is 1 15/16" - Pic #1 longer of longer tab width is 1 3/4" length of shorter tab width is 1 5/8" #2 is installed clip #3 pic is of broken clips These clips were installed in 1998. The heat and cold have taken a toll on them and when they were removed to clean screens, they snapped. They are u ... (cont.)

The left window latch is shown in the photos. The right latch is a mirror image. The windows were manufactured in 2005 or 2006 by MI Windows and Doors of Gratz, PA. One photo shows that the latch is 2 1/4 inches wide. Please identify. Thank you.

Pin has spring behind to hold in slot at sides of panel. Glass originally purchased at Lowe's through BetterBilt South: single hung: Colonial style: Aluminum. Hope this helps.

I want to share a photo of my old lock that I fixed with your 3" Latch Spring 91-112. I looked all over the net, and couldn't find what I needed until I landed on your site. I hope my photo is helpful to others restoring old rim locks. Because I had such good luck retro fitting this part, I've c ... (cont.)

Do you carry this part ?

Hi! Could you let me know if there's a part to replace this retaining strip? Thank you!

I like to replace the lock with handles do you have the set

Need a Window titls left and right picture shows top and bottom of existed one

I need to replace my channel balance for my Viking window. Stamp 2640, 27 inches in length and 1/2 inch width

Need replacement part

In need of Balances for Croft windows. H-R20-48x74 Series 5 CRO-1 BALANCE IS 29"LONG 3/8 THICK YELLOW TIP WEIGHT 18.8 LBS THANKS TROY

Hello, I'm struggling to find a replacement that matches this part. I cannot find any manufacturer on the door itself, but the soft close piston says Forever Doors. The strip runs the full length of the door on both sides (but not top and bottom) and is white. Thanks in advance for any help you're ... (cont.)

We're looking for Mercer window latches, white 3 1/4" long. Any help would be appreciated.AdrianaResident Manager

I've watched your videos however, I don't believe I can remove my windows. Any solutions?

Need to replace locking mechanism