Viewing all customer Discussions for:

Other

Drawer Guide REISSS MANUFACTURING COMPANY N Y C R 26 .PATENT: 2857233 DIMENSIONS OF GUIDE PATH : WIDTH 3/4 INCH DEPTH 1/4 INCH

This sash guide in the pictures has deformed and broke. The guide is screwed with a single screw into the top of the channels on both sides of our single hung windows (only the bottom window goes up and down) and this sash guide holds the window balance in place at the top of the moving window. Th ... (cont.)

this is a crank for shutters need the inside gear.

Tilt window latch

It looks like it says 932 on the one that is broken. It appears to be all one piece when I took the one out that wasn't brokenThe coil is 1/2 inch

I'm looking for a replacement mechanism, can you help?Please let me know.ThanksDave

Looking for right part number to replace balances . Metal channel measures 30". Thanks

Looking to replace these failing hanging drawer guide holders.

Hello. We have a customer with a late 1980s/early 1990s Kolbe & Kolbe double casement window unit that is in need of a new operator and some locking mechanism parts. Other than the finish, the unit is in great shape, and the because of the location it would be extremely difficult to replace with ... (cont.)

This is 1-1/4"Wide x 1-1/2"Tall x 1/2" thick. The spring is stamped F8. The window weighs 16lbs. Is it available, or what would the replacement be? Is it parts, or is there a whole assembly? This was a Patriot Double hung Type "VSDH" Code "GVW-K-1" Thank you, Dwight

Bureau is old. Size of handles varies 2.5 inches across to 3.5 mid-hole to mid-hole. thank you for any information or suggestions

Hello, I am looking for a replacement Window operator crank handle with a 3/8" gear bore for an Andersen casement window. Your part number 39-286 is very close but not exact. Mine has a number on it 45001 and larger dimensions than your 39-286. Please see the pics I am sending as well.Thank you for ... (cont.)

Hi, This product is shown as needing both #6 wood screws and machine screws (for the piece attached to the drawer. Could you please let me know the specs for the machine screw? Are they included? (I know already the wood screw is not). Thank you

I'm looking for the black (salt incrusted) piece attached to the mortise lock, part numbers PAT #6.264.252 & 5.820.170 Thanks very much, Rich

I'm not sure what the exact piece is called. I need the securing piece for the extension arm of the window. It is the small metal piece the secures the arms together and latches under that pin.

Hello, I do not see any model numbers or any markings whatsoever on this block and tackle. As you can see the plastic is broken off on one end. I would 12 of these. Thanks, Wayne

Looking for some snap in window glazing for my windows. Some of them are cracking. Brand is Alenco and a couple pictures can be seen here: https://imgur.com/a/kC335D8 Thank you

No markings on window, but a number 6 or 9 on the spring. The lower window weighs 11.4 pounds . The window is a double hung tilt sash window with both sections tilting in.

Hi . Do you have this kind of latches . I would like to order 10 please . Thank you

I have an old sliding glass door and the rollers are deteriorated. There are no names or numbers but the dimensions are as follows. 1 1/2 x 2 1/8 x 9/16 wide. I need two of these. I would rather have steel wheels if possible.