Viewing all customer Discussions for:

Other

Can you help me with a order of two on these photos the window sash weight is 23 LBS.Brad thank you

This pivot bar has threaded holes. I need to identify the part number please

Don't know what this is called. It is part of the window pulley system, this one pictured is good, we have one which broke in half and now when you open the window it won't stay up.

I'm looking for the part that is in the pictures provided. It is a (safety device?) that stops the window from raising all the way up on the second floor of the house. I guess this device is to prevent from falling out of the window. I have several that are broken and need to be replaced. I beli ... (cont.)

Need two of these parts, 29" long (metal part). From Viking vertical slider windows. Stamp on the side is "28301"

Hello, I am looking to replace the crank and the locking mechanism for my Pella windows. I prefer white, and I would also prefer the crank that folds on top of itself, if that will work. Please let me know what replacement options might work and whether they are DIY or hired professional. Thank yo ... (cont.)

The left coil balance has an 8L marking and the patent number 6,378,169. The right coil balance an 8R marking and the same patent number. The pivot shoe has a U shaped opening the bar and attaches to the coil on the inside.

Is this something you might be able to help with? This part (I call it a "tensioner") cracked and needs replacement. The windows are 15 years old and were installed when our house was built. I have four of these double hung windows, and each has two of these parts (one in each side channel of the ... (cont.)

Hoping the pictures attached are enough to verify that I have selected the correct replacement part. Your part 15-176 appears to be the closest match. It measures 1/8" less in overall height. I don't have measurements for the width and thickness. Any advice would be appreciated Adam ... (cont.)

I am looking for tee type crank handles for my Kolby (K/K) casement windows. They are the bronze / stone color. The windows were produced in 2012/2013. Thank you, Scott

To whom it may concern- We need help replacing the above casement window cranks. We have no idea what type of windows these are. Thanks. Katie

I have PGT windows and in one window the cord that attaches to the pulleys and spring broke. The channel balance is 37 inches long without the end guides. 36-3-EKS-CMC-6 is written on the side of the channel balance

Product ID 5500. S.O. 18394926.1 CCL#440-H-046.03 its a lock for my door.

The mortise needs replacement.

No names or numbers. Window base 2 3/4" x 1" deep w 5/8" lock diameter, receiver 5/16" deep x2 3/4" long,

need this clip for the window

Hi Swisco, Please let me know if you have this part to a glass shower door

I'm in search of both a right and left-hand (2) replacement cranks for two of our casement windows. I see where the part number S-1081-66 shows up in some of your posts but I don't see where anyone has confirmed that the part(s) you recommend did the job. Can you tell who the window manufacturer ... (cont.)

Help with balances Marked 2640 BSI op what replacement part do I use? I need a couple sets +, and is there a way to increase the weight strength a single step? Thank you! -DAT

Need help to identify a channel balancer. The metal part measured with length 31.7" The stamp shows 31DS 38 B.S.I PH Thanks, Simon