Viewing all customer Discussions for:

Other

Length - 31 5/8 in (metal channel part)Stamp 31 5 B.S.I. PDMilgard WindowShoe depth - 1 3/32 inBalances needed - 4Dont know the weight of the window.Thank you. Mark

Looking to replace this 3 1/2 in Timbercrest drawer pull...can you help? Thanks!

My second and more difficult request is for two (left and right) replacement mechanisms ?the whole thing?for these Pozzi hardware sets, patent number 4083264. I am looking for a company which will accurately specify a replacement. Measurements on this are 5/16 for the post, 4 7/16 for the top bar en ... (cont.)

Please let me know if you have a replacement top sash guide for this part.

Need to replace roller for Pella 7281 Fixed/Vent OX Sliding Contemporary Door. What part should order to replace these two roller assemblies? Thank you.

Hi there, We have these sliding door wheels that we need replacements for. The wheels themselves are 1" in diameter. Do you have anything that might be replacements for it? Thanks

Part number 32-9 GA2 CMC 20

I need help identifying these parts. Thank you!

I ordered this from this company prior and can't remember what size I ordered. Also is it normal for the top sash to fail after only about two years. Measurements 1 9/16 long Top is 7/8 wide

Several windows of different size have rusted out on the bottoms. Included are photos one of the windows hardware.

Length of metal channel - 32" Width of metal channel 1/2" Stamp - 3140 Total balances needed - 4

I am looking for both hardware handles and wood trim for these windows but I cannot identify the manufacture. joe

Hello, I am looking for spring balance unit (complete assembly) for my double hung window. as you see from the photos the code stamped on the outside of the unit is 6R and the # stamped on the leaf spring is 6ck. would you please direct me to the part I need to order. thank you, Maher ... (cont.)

Need the parts on side of windows for up and down

Couldn't find any marks on hardware.

morning wondering if you have these parts? the windows were installed in 1989 this is all the info I could get off them. thank you.

Do you have this materials? Its a 22" long hinge for a hopper window

Hello - I have some older HURD casement windows in my house and need to replace the window cranks on left and right opening windows. It looks there is a possible model # 07900 stamped in it. Hopefully you can help me out on what I might need to order to replace these. Thanks and have a good day ... (cont.)

Trying to locate a spiral balance for a up and down sliding keller aluminum type window. 17 inches in length. Diameter is about 9/16th (I see 5/8th inch online so maybe it should be counted as that 1/16th larger size). Has the bottom portion that serves as an anchor that is screwed to the bottom ... (cont.)

Broken low profile tilt latches for SoftLite Barrington windows, purchased September 2006. Approximately 2 5/8 inches by 9/16 inch.