Viewing all customer Discussions for:

Other

I am looking to replace this track on the other side of the closet which has bowed in and out of whack. The length of track is 84 inches. It has concave wheels.

The side where the handle/lock has cracked and pulls away from the glass. I need to replace the trim piece

looking for a replacement balance

This is a PADO lock body installed in Larson storm door. Is your item 40-198 the replacement? The finish l need is bright brass faceplate.

Window doesn't open the crank is not catching on the outer part

Length is 20 13/16". The stamp says 2020 BSI TV. I believe these windows were bought at Home Depot approx 2008. Will need at least 4 of these.

Hello, We are looking for exterior glazing bead replacement for: Jeld_Wen White Vinyl Windows 8600 Series 1999 3/4" IGU Thank you, hoping you have some available!

Latch has snapped off left side of window and completely broke on right side on this window. I would like to order 4 sets of latches to replace a few of my windows.

Pat No 5.704.165 I need the replacement part for this item.

Hi there, Hoping you can help me identify these two cranks needed. Arm is approx 12" long Thanks! Email back for photos.

The numbers etched on the 30" balance looks like 29-4 nj B-S1. Those are the only markings on the balance. I ordered a set of balances in the past for the same size window for my home and you told me they were Model Numbers 380-30, option: 2940. Would this be what I need to replace this current ... (cont.)

Reached out to store - where furniture was bought, recommended this site; furniture made by Bassett, +/- 10 Years Old - Plastic drawer sliders broke - repeatedly, trying to find out if they are still available (or something better), and how much 15 of them would be. I also need the availability of ... (cont.)

Looking to buy two new screens for my condo windows, just to update the look. They contain four "plunger pins" I believe they are called. (they pop in and out in order to remove the screen at any time) I would like to purchase 2 of these and 8 plunger pins. Any ideas? The window screens have this ... (cont.)

Hello,I need to replace some of my casement window operator (as photo). Can you please give me some advises of which one on your site will my window?Thank you,Sung

Need to replace balancer. which should I buy?

I need the pins for the screens as well as the corners for the screens. I also need the seal for the bottom of the window. I hope this helps us figure out what we need from you.

Do you have this window balance

Please let me know the part number for this. Thank you

Hello, I would like to buy 27"channel balance and don't know which series 385 or 380, could not find any part # from my old Channel , Please Czech if you can identify from pictures attached. My sliding window requires two channels one on from left and one from the right. Thanks Sonny ... (cont.)

Locking for a left hand drawer guide for cutlery drawer.