Viewing all customer Discussions for:

Other

Hi, I'm fixing a 31 x 9/16 x 5/8 channel balance with weathervane 19-038 and 15-193 tops and bottoms. I need a top sash guide replacement (See attached photo). The current guide is 3.25" long and 5/8" wide. Mounting hole is 2 3/8" from top. Which replacement component would you recommend? Tha ... (cont.)

I am needing replacement rollers for shower for a 2008 Escalade RV

Can you help me replace this balance shoe? Thanks, Allen

I have a broken window tilt latch with the following measurements: 2 5/8" long 7/16" tall 11/16" wide Your video was very helpful in removing the latch - now I need assistance finding the correct replacement. Thank you!

I bought my home in the late 1980's and don't know the cabinet manufacturer but suspect it may have been Merillat though there are no identifying marks on the drawer. The bottom of the piece in the photo broke off. A handyman tried rotating it but that has not worked. Can you identify this or recomm ... (cont.)

Not sure of the brand of window, previous owners choice. Take a look at the attached photos. There Is a bottom sash moveable, approx. 11' x 45", window. The sliding mechanism has come loose. It appears to be spring loaded with a sash cord attached to the sash rail along each side. Both sash cord ... (cont.)

I am pretty sure I need the 33 inch series 385 channel balance. The only other one that I am considering is the 33 inch series 380 channel balance. Do you think I'm on the right track? I see that the only difference between the two is the depth of the shoe, and I think the one I have is the longe ... (cont.)

i purchased 20 windowa from home depot appox. two years ago size are 30x60 inches and the balanse are starting on some of the windows to fail..can you helo me please?

Looking for this window crank or something that will work

I have the no tilt aluminum windows that use channel balances (it has a stamped number 283000D and I need to find the plastic clips that catches the balances. I included 4 pictures of a good clip as opposed to a broken one. Thank You, Raul

Hi Hope you can help with the replacement for a PPG Herculite handle and lockset as per two pictures attached. The information on the door seems to relate to the glass rather than the door itself. Door is about 20 years old. Thanks so much!

Hi, I have Napco Dual Guard sliders that were installed in 1985. The windows are in good condition, but the weatherstripping on the outside of the windows has deteriorated. I live in Pittsburgh, but need help figuring out what weatherstripping I need and if there is a service available for install ... (cont.)

I am looking to get A bunch of these window tracks needed for a property of mine. We have a lot of windows that are not staying up or closing properly which is caused By the old tracks which need to be replaced

Hi, I'm looking to see if S385-21 is the right part. I have attached a picture of the part with a ruler. There is 20-4 printed on the part. The top guide measures to be a 60208 from other site numbers. It is a winged version. The bottom guide I couldn't find a match for on your website. Other pl ... (cont.)

I have a sliding glass door that is missing the keeper. Which part would you suggest? Thanks in advance.

Can you please help me identify this bracket, I am missing one. There is a small square nut in the upper track that I guess the screw would screw through the pivot socket/bracket and into

We need to replace the crank for this window. Can you help?

Hi, we are looking for an upper hinge for an exterior door. (Pic attached)

Looking for "Spring Take out clips" for 21 year old double hung Windsor Windows

I need a new handle with key access and a double lock for a Simonton sliding patio door. Where or who can I buy that from?