Viewing all customer Discussions for:

Other

I've attached pictures of the clips in the frame & the top pieces installed on the window

Looking to purchase replacement (2)

I am sending a picture of a top cap and hope that you have the same part, or a similar part that will work.

Hello! I'm looking for a replacement for the above pictured lock. The spring in the latch mechanism has broken, so the latch kind of just flops around. It still sort of works, but without the spring, you have to fish the latch out of the receptacle at times. Thanks! Mike

Vetter window rtt hand crank as you look from inside 31 3/4 x 42 1/2. Arm mechanism is bent so window won't close

Can you find these? Will need about a dozen but will buy what I can get if you cant fine a dozen

Looking part #1274004 Patio Insect Screen Door upper roller Door is 1979 model.

Hello - WE have a large patio door (48"W x 96"H). The rollers need to be replaced.I'm not sure if there are rollers top and bottom, how many are required, or if the attached images are sufficient to make a recommendation.Thank you

20" serial markings on old channel 19 3 JK Caldwell

I need replacement channel levers for an Imperial window in photos. Screws are 2+10/16 inches apart.

Looking to replace Balancer on old aluminum window. Picture attached.Number 1820 stamped. You can Zoom in to see plastic ends.Plaese indicate availability and price for Qty 2The aluminum channel is 1/2"wide and 19" long.Thanks

Windows were installed around 1989 Marked 3130 J I need to replace both sides of the window Can you advise which parts I need to buy please?

Trying to find the crank handle for an Anderson Casement Window that was installed around 1995. Laser numbers on the main frame crank is 1361323. Other numbers are: C5-C6, CXW3-CXW45.

Need assistance identifying and replacing two broken window shoes for a United Window.

Need to replace the pictured balance. It says "2230" on the side.

Vinyl patio door lock interior lever has broken off.

This door handle and hardware is missing the lock and the inside latch won't lock...I need a entire new everything...

I'm interested in getting window sash locks for my Lawson windows 18-192, SH 7500 aluminum single hung windows. They did not come with any locks. Can locks be installed into aluminum window frames without breaking the glass? I came across your window sash lock part 90-005 and your #8 x 3/8" so pan h ... (cont.)

Hi. I am in need of some parts for my simonson windows. The part in question is the nylon piece which attaches to the spring that holds the window. The only identifier on the part is the number 409. I have included pictures. Is this a part you carry? Thanks, Brett

I can't find a replacement part. Maybe there are several parts to buy. Springs seems to be ok, but I would not mind changing them. Thanks for your help