Viewing all customer Discussions for:

Other

I need to identify a pivot bar that will fit my Simonton window. It's the bottom sash that is needed. The piece is about 2.59 inches long. I found a Simonton pivot bar on the site, but it doesn't have the little bump seen in IMG_1555. Thank you for your help!

Good morning. I am seeking replacement parts to reattach the sliding portion of my shower door. I have more pictures taken if needed. Part #10-061 looks identical to one part on my existing door. I am willing to pay a consult fee if necessary for assistance to fix my shower. It's a steam shower. I h ... (cont.)

Do you have something like the pictures that will work as a replacement--i need 10

I looking parts what I send to you mechanism 50 Each left and right lock 100 and crank 100 please call me if you have any question 773 343 9998

The picture is the front and back of the T-Balance Shoe from one of our windows. We have MANY that have "released" from the metal U channel spring. The length is 2" and the width is 1 3/8". I'm not sure if the 1 1/4" item you have is the correct replacement and not sure of the difference between ... (cont.)

I have multiple windows that will open but will not stay up. The only issue seems to be the clips that secure the channel balance at the top are broken. Am I able to replace the top portion of the balance or am I required to replace the entire channel? Thank you in advance for your help. Arek ... (cont.)

1inch or 2inch for door plate. 1 1/2 thick door Ii need an outswinging screen door handle that will fit my door. The door plate seems to be too short or too long

I need an unbent one, and I realize that I'll have to compress the extruded channel since it stretched open to get the window open. I straightened it once, and think it'll be weak fro work hardening... it is 1/4 wide, and 3/16 thick, about 2" long.

1/2 inch x 29 inch non tilt channel balance only marking 28B.

this is a 30" channel balance with text stamped 29 6 0a BSI. I need to order 2 replacement assemblies. Thank you

Only need handle replacement Found patent number 7.871.112B2 as well as Q28G, nothing else Including several pictures

WIDTH 1 1\4" DEPTH 9\16" HEIGHT 2 1\2"

Hi can you please help me with this channel balance Thank you

This is the left-hand window all parts are included on the opposite side for a right hand window I am missing the two parts that are circled as far as where I can identify from your site it is the stud bracket I saw one that looks the same but the mounting stud is facing down instead of up he's faci ... (cont.)

There are two modules on the bottom of the sliding window. Each module in a nylon frame with two wheels that snap in. the wheels measure 13.5mm Diameter x 5.8 mm wide. they have a molded axle that is 6mm in diameter. Around the top of the frame is a molded on bezel that keeps the snap in module from ... (cont.)

Look to replace 4 sash's. Unsure of what to purchase.

I am look for a replacement Truth window closer part # 120198.Please see my pictures.Your help with this matter would be greatly appreciated!Thank you in advance.Regards,Daniel

Window opening size is 20 inches vertical 30 inches horizontal. Crank does not move window and is loose when turned. Numbers are DF 1100A; CCMC 9186; Brevet Can #1,160,103; Brevet USA #4,400,923; ????????A3,B3, C3.Side arms are ok.The window moves freely when pushed in or out by hand with the c ... (cont.)

Need to replace some draw rails see photos can you help?

Hello, I have a window screen that measures 18-1/2" high (top to bottom) and 30-1/4" wide with sliding locks in the frame as shown in the attached photo. The sliding lock on the right side of the screen frame is broken. I have attached a photo of that as well. The sliding lock measures 3/8" high ... (cont.)