Viewing all customer Discussions for:

Other

Replacement Roller for likit # 3,106,753 replacement roller 8' Patio Door Slider. Thanks

I have a NAMI series 6000 SGD patio door that I want to replace the original handle with a key lock type.

new complete channel balance only numbers are 25 3 and if you enlarge photo you might be able to see other numbers

Looking to replace my long handle crank. Is it possible to have a male T-shaped crank handle? 5 16" size of the male spline required. Thanks

Can I order from the company?

Can you help find this Truth Hardware tie operator: 3 Cyllindracal roller (middle roller more or less centered in the middle between the other two rollers) 34.9 inches length *It is not part 6-1481-35-3 as middle roller is not centered. What type of Truth Hardware operator is this? The photos show ... (cont.)

Latch is flat with thumb pull sticking up-no screws visible weather stripping is in a groove on the bottom of the top window, the "pile" is 1/2" long and touches the top of the screen

1810

I have a handle that broke off my window that I think might be Milgard brand. I am looking for the handle that you screw around with two screws to the window and you just rotate the handle and it pushes a flap against the window frame when you close it to seal it and lock. Please see pictures. Can ... (cont.)

A metal part measuring 2.5" long, with the number "6236" machined on it. A metal tab protrudes from one end. This part was screwed onto the bottom of the lower window, a vertical, double-paned, double-hung window with the text "01-4 AWS WS-5" etched into the lower left corner of the lower window. ... (cont.)

Looking for replacement pop on rollers for bottom of sliding windows

Hi: Don't know the supplier of these vinyl single hung windows. They are about 15 years old and some of the snap-in glazing pieces have fallen out. I can't seem to match it with any of the styles on your website. Do you have any ideas? I took some pictures of the hardware in hopes it may give you s ... (cont.)

Not sure what part numbers are correct to replace both right and left cranks Measurements are 5in between screws and 5in straight arm length, view is from inside home.

Do you know where I can find these?

Entry guard truth 40754 - casement window operator, bracket attached to window is 11" long. Gears no longer engaging in closure, handle works its way out of mechanism. Need to replace.

Hello, The top nylon fitting on one of balance springs has broken and I would like to replace the shash springs. My house is 20 years old and with the original windows still installed. The Sash Spring is 30 inches long. There are markings that read 2930 BS J7 ( I'm not sure about the J7 but the Sp ... (cont.)

Do you have any part that resembles the plunger pin needed?

Here are pictures of the parts I'm looking for. Also may need the tool to spread the window open. Also any help with how to remove the sash it appears to be attached to the stops

Hi I contacted Delta and they sent me to you looking for 32-120 is delta glide 100 needing 3# plastic draw sliders and 2# 32-148 TG50 plastic draw sliders can you help meRon

2 5/8 x 11/16 x 7/16