Viewing all customer Discussions for:

Other

I am looking for a crank mechanism for my Vetter windows. There are no hinges on the window just the crank mechanism the bottom and a piece at the top of the window that I would need as well. I understand that this company is no longer in business so I was hoping that someone knew what Tyrone of re ... (cont.)

Can you identify the replacement for this part?

Aloha,I am trying to find window crank and housing parts for the window listed above. (1992)I will need about 30 of them.Cranks broken from aging.Thank you. (Mahalo)Dr. Seulyn

I have a broken window guide, and I cannot seem to find it on your site. Can you please confirm you have this part or a replacement?

Hello I am looking for this track I have put in 2 photos 1 length is 59 inches the track width is 2 3/4 with slide opening for closet metal doors. My name is Anthony..pictures of what is needed provided in this post exactly the same way 2 needed of tracks.

Attached are pictures of the vinyl bead glazing for Quaker aluminum single hung single strength glass built around 1987. We have nearly 500 of these windows. Thank you greatly for your help.Russ

cam only broken

Mechanism in window 5 inches wide, cover 5 1\4, crank handle 4 1\2 inches long according to how you measure from end of shaft to tip, and 2 inches high mid shaft to bottom of handle. Also shown mechanism on opposite side intact. Label on mechanism manufacturer name Truth.

Thank you

Stamped 28B USB. Metal channel is 29". Outside channel depth is 9/16", channel opening width is 1/2".

Hello, I am looking for the pivot bars to match this one. Also, the vinyl where these attach is cracked on most of the windows, so the bars will wiggle when going up and will most likely break soon. If there is a longer bar that has a hole that will match the 3rd hole, or just further back where I c ... (cont.)

It's has a stamp on it saying Truth. Crank was put in our house in 1993.

is your wrench for Pella windows

Need 3 pieces that customer threw away. Need 2 pieces 27 3/4 and 1 piece 43 1/2. No name or tags on window. Measures 1" wide total. Section over glass is 5/8" and section that slides into retaining groove is 3/8". Almost flat in appearance.

Hi Believe to be andersen pn 1521604 Do you have anything compatible? what is the return policy if doesn;t fit?

The latch is missing on my daughters sliding door. Center to center us 3 1/2"What replacement would you recommend?Doug

Need replacement part for Anderson windowHouse built in 1980The part # is 60 P 719117

I believe Alcoa is the manufacturer. The windows were installed in 2013. It's 1"x 2 3/4". Stamps on inside of latch: AN 8300-02 8301-1 8313 002

This part is broken and we want a replacement We found a sticker on the door it says CONFORMS TO CGSB 12.5-M86 Type 3C ANSI Z97.1-1984

It most closely resembles the Certain teed coil balancer by dimensions. The band is 3/4" thick. The pivot shoe is 1-1/4" wide. Over all length looks to be about 4-1/2".