Viewing all customer Discussions for:

Other

I just purchased a house with all double hunts that need several locks replaced. Do you have these crestline locks?

I need the Correct part to replace.

Hello we found this balance in a window it only has strings in it I have a picture of what the strings come out but we don't have any idea what kindof balance it is if you could please give us a idea of what type of balance it is I would really appreciate it! Thanks

Can you help me identify the keeper I need? The building was constructed in 1980 or so, if that helps. Thanks!!!

I need to replace to channel balances on a window that is 34" wide and 59" tall. The window that slides up and down is counted in these measurements. Separating the window out it is 34 inches wide and 30 inches tall. The channel balance in the window now has the markings 27 3 on it and 158 - 7B (not ... (cont.)

These clips hold in our wooden grates. Window Technologies is the manufacturer.

I haven't been able to find this part.

Little square nylon spacer or Guide On the side edge of the window sliding frame.

I have a sunporch that has 7 North American windows (various sizes). The window seals are in varying stages of decaying. On a couple of windows, the round foam part has come completely off. The seals are on the bottom of the window. Hopefully you are able to see the 3 photos I uploaded. Are you a ... (cont.)

I measured with ruler, see photos, the top width that slides into window metal is one-half inch--The pivot is 2 piece, that arrow tip slides into the main piece with the tab that secures the window sticking out--I sure hope you can help. Thank you, Lou

Hi- we have a bunch of window cranks that have broken. We previously had a handyman replace, but the part was too small and flimsy. it looks like your product would be a better match. i have attached pictures of the original crank. I also wonder if the thread is too worn down... the product that l ... (cont.)

Length is 29" Width is 1/2" Markings 28 2 LS CALDWELL Manufacture of Window JORDAN Single Hung Non Tilt Windows

I am trying to figure out which wool pile is needed to replace the worn/missing wool pile in my windows. I believe they are Ideal windows but I am not sure. I attached pictures of the wool pile from the window in the 4 pictures. I already purchased 13 rolls of Gray Pile Weatherstrip, 7/32" x 5/32' ( ... (cont.)

I removed the existing door by lowering it enough to push it off of the black threaded hanger bolts shown. I disposed of the door with the receiving brackets still mounted to the top of door. I am in need of a similar top of door bracket to prevent having to dig into this any further. ... (cont.)

Casement window parts. Please let me know if I need to have a count of which way the open out and how to correctly identify that part..

I need quantity two for my Loft Window. Markings = 27 4 KT CMC 4 length of channel = 28 in Thank you

Looking to replace / order this part

Truth Part # 45136 rh

Hi, The lock which goes into the frame is broken. It's a Better Built window. The window slides up and down and tilts. Please let me know if you need additional information.

Good Afternoon, I need to replace some springs from a few windows. The above photos are the parts needed. The one labeled D has a 6 stamped on it. I will need to replace both sides so need two parts. The one labeled A has an 8 stamped on it. I need 4 of these for two windows. Can you let me know ... (cont.)