Viewing all customer Discussions for:

Other

I have a #r24 927 1088 ballance that I need to replace, can you help

Hello - I am in need of three replacement door sweeps to fit my existing steel, wood core exterior doors. The sweep slides onto the door bottom where the door bottom has L shaped INWARD bends that fits onto the sweep edges. Do you have this replacement part? Thank you! Dave.

DANVID-1-97

The geared arm is 3 1/2" from center to tip. The clip arm is 4 7/16" The only marking are Truth and patent # 4 241.541 Patent 1982

These doors are approx 15 years old. Should the one top pin have a plastic bushing that slides in the track?

Ansi z97-1-1984 16cfr 1201 -II Sgcc 598 1/8u Numbers on the glass I have 4 sliders need to know what fits please

I have a single hung window that requires channel balances to be replaced. I have identified as follows: 1-length 28" 2-width 9/16" 3-depth 1-3/32" 4-ID stamped '2730' I am unsure of which item identification to request for replacement. I have additional photos which can be uploaded if necessary. ... (cont.)

The part of the weather strip that inserts into the groove/kerf is thicker than the weather stripping sold at typical hardware stores.

can you please tell me the part number I need to order a door handle with lock for my Simonton 6068 patio door?

Approx 2.25" long

do you have replacements for these?

I am looking for 36 of the part in the attached photo. The numbers on it say 3190A. The metal to metal length is 32". Please let me know if this is something you can get.

Good morning I need 4 balances 29 inches doesn't have to have the white sleeve on it, can you get me a price please? Thanks!

Vision 2000 windows - balance spring hook is broken. Balance number is 18TG. Spring is 7/16" diameter, 5 7/8" tip to tip of hooks and wire diameter is 1/16". Spring is stiff - can hardly pull it.

No identification marks Anything close I will open too.

Good Morning, I need to replace a few Simonton double-hung window balancers. The spring section, at top of the window track, has two units, each fastened with two screws, with the lower spring unit slightly longer than the top spring unit. I'd like to obtain the parts to replace the entire balanc ... (cont.)

Can you tell me exactly the replacement part?

Greetings, I'm looking for either a replacement door handle or just the locking mechanism for an Acorn DorWAL L-120. As you can see from the picture, the locking mechanism is on the handle itself, not between the inner door handle and the outer door handle. When I look at the door frame inside my h ... (cont.)

Hi in need of 2 balance parts for double hung window. . Thanks

the rotary spring mechanism broke need a new one the lok can be eliminated if you cant find this set up