Viewing all customer Discussions for:

Other

Looks more like the.187 style or the .270 T- Slot foam filled, can you confirm? T measures approximately 3/16 of an inch, thank you! Chip

The tip of the rightside latch is broken off. I need replacement part and also instructions on its removal and installation. Does it slide out or pop up?

Need Sliding door knob (Truth 45004 part) Looking more closer I found the part number of sliding door lockWhat really broke is the PIN which goes inside and turn Maniacal to unlock the door from top and bottom of the door ?If you don't have full lock do you have only PIN or where can I find one ?Muc ... (cont.)

These are the pictures of my sash balance. From my measurements, it appears that the 351 Sash Channel Balance is the correct size for my replacements based on the top and bottom guides measure your description. The number 2830 is imprinted on the sash. Would it be ok to go up to a 2840? In ad ... (cont.)

Hello,My name is Eric and I've got a house full of failing window balances. I can't find replacement parts and there's no good documentation on the windows themselves regarding who makes them. Do you have a recommendation as to which balance assembly from Swisco I could try as a replacement? Thanks ... (cont.)

I bought my 2"horizontal blinds (beige) and need to replace two of the post/sticks of those blinds. If you don't ship to PR, I can make arrangements to receive them at my son's home in NYC.

Broke latch lever off. The old one was brass but really doesn't matter. White would be fine. Need lock and keys handles. Took the old one off and holed matched perfectly with 82-086. Lock and latch are Ok. Door is 1 and half inch thick.Does everything else except lock & latch come with handles and k ... (cont.)

This part attaches fixed side of patio door to the frame as shown in IMG_2582. The part in IMG_2579, 2580 and 2581 is broken.

Unfortunately I don't see any markings of any sort. It consists of a 13" long spring with a 27 5/16"hollow plastic rod running down the center. A molded black piece to engage with the tilt function and a white plastic piece to tie the string. Also looking for the spring loaded tilt window latch. ... (cont.)

Hi, I have a window that has the 2 springs broken on each side, I was able to pull the white housing out of the sash, I attached a picture with it. The window weighs 13.5 Lbs. Can you advice which balances I need to fix the window? Thank you. Cris

I think i need some balancing shoes for this MGM window. It will not stay up. Also need a lock for one of them. This is a double hung window was installed about 18 years ago.

Stamped with 27B and also stamped with OL BSI

The lock isn't working. When you go to lock it the latch will not go up and down.

Hello, I'm looking to replace the left and right latches in two windows in my house. So total of 2 left and 2 right latches. These are the latches that prevent the bottom half of the window from Swinging inward. Thanms

Hi, this part is broken and need to find out where I can locate a store that sells these parts in New Jersey

Looking for replacement part either similar or one that will do the same job

Looking this window balance, it's 1/2" X 1/2 " didn't see any # on it, not sure do you have it ? Thank you !

The crank for one of the KK windows in my guest house is stripped. Can I get a new one (or two)?

Hi, several of these window sash cams have broken in my windows, but I can't find an exact replacement. Without them I'm unable to engage the window balancer (I have single pane single hung windows) Any help?

I am looking for a locking device to hold a Marvin Casemaster Casement Window Screen in dark bronze. I did not see anything close on your site. Can you help? It looks like the attached. I also need assistance in how to install. Thank you.